Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Door Lock Operation Warning Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / Symptom Diagnosis :: Door Lock Operation Warning Does Not Operate

Diagnosis Procedure

CHECK DOOR LOCK FUNCTION

Check door lock using door request switch.

Does door lock with door request switch?

YES>>

GO TO 2.

NO>>

Refer to Diagnosis Procedure.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.

Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

REPLACE INTELLIGENT KEY UNIT

  1. Replace Intelligent Key unit. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Symptom Diagnosis. Door Does Not Lock/unlock with Door Lock/unlock Switch
    All Door Description All doors do not lock/unlock using door lock/unlock switch. Diagnosis Procedure CHECK POWER SUPPLY AND GROUND CIRCUIT Check door lock and unlock power suppl...
    Symptom Diagnosis. Intelligent Key Low Battery Warning Does Not Operate
    Diagnosis Procedure CHECK INFORMATION DISPLAY Check information display. Refer to Work flow. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace t...

    Other materials:

    P0182 Ftt Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0182 00 FTT SEN/CIRCUIT (Fuel temperature sensor ″A″ circuit low) Diagnosis condition Ignition switch ON Signal (terminal) Fuel tank temperature s ...

    Dtc/circuit Diagnosis. B2422-78 Back Door Position Abnormal
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B2422-78 Back door position abnormal (Back door position abnormal) Diagnosis condition All times Signal (terminal) Encoder LH signal Threshold When ...

    Mixture Ratio Self-Learning Value Clear
    Description This describes how to erase the mixture ratio self-learning value. For the actual procedure, follow the instructions in “Diagnosis Procedure”. (For details, refer to Work Procedure.) Work Procedure START With CONSULT Start engine and warm it up to normal operating tempe ...