Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Back Door Does Not Open

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / Symptom Diagnosis :: Back Door Does Not Open

With Automatic Back Door

Description

Back door does not opened using back door opener switch.

Diagnosis Procedure

CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT

Check that DTC is not detected with automatic back door control unit.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Refer to DTC Index.

CHECK BACK DOOR OPENER SWITCH

Check back door opener switch.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK OPEN SWITCH

Check open switch.

Refer to DTC Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace the malfunctioning parts.

CHECK CLOSE SWITCH

Check close switch.

Refer to DTC Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace the malfunctioning parts.

CHECK HALF LATCH SWITCH

Check half latch switch.

Refer to DTC Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 6.

NO>>

Repair or replace the malfunctioning parts.

CHECK BACK DOOR CLOSURE MOTOR

Check back door closure motor.

Refer to DTC Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 7.

NO>>

Repair or replace the malfunctioning parts.

REPLACE BACK DOOR LOCK ASSEMBLY

  1. Replace back door lock assembly.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

GO TO 8.

REPLACE AUTOMATIC BACK DOOR CONTROL UNIT

  1. Replace automatic back door control unit. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

Without Automatic Back Door

Description

Back door does not opened using back door opener switch.

Diagnosis Procedure

CHECK BACK DOOR OPENER SWITCH

Check back door opener switch.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK BACK DOOR OPENER ACTUATOR

Check back door opener actuator.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

REPLACE BCM

  1. Replace BCM. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Symptom Diagnosis. Back Door Auto Closure Function Does Not Operate
    Diagnosis Procedure CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT Check that DTC is not detected with automatic back door control unit. Is the inspection result normal? YES>...
    Symptom Diagnosis. Door Does Not Lock/unlock with Door Lock/unlock Switch
    All Door Description All doors do not lock/unlock using door lock/unlock switch. Diagnosis Procedure CHECK POWER SUPPLY AND GROUND CIRCUIT Check door lock and unlock power suppl...

    Other materials:

    Ipdm E/r. Precaution. Precautions
    Precautions Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and ...

    Diagnosis System (front Camera Unit)
    Diagnosis Description APPLICATION ITEMSCONSULT performs the following functions via CAN communication using front camera unit. Diagnosis mode Description Self Diagnostic Result Retrieve DTC from ECU and display diagnostic items Data Monitor Monitor the input/output signal of the cont ...

    Steering Switch Signal a Circuit
    Component Function Check CHECK COMBINATION METER INPUT SIGNAL CONSULT Ignition switch ON. Select “Steering switch input” in “Data monitor” mode of “M&A”. Check that the function operates normally according to the following conditions: Condition Value CONTRO ...