Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Auto Operation Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Roof / Symptom Diagnosis :: Auto Operation Does Not Operate

Moonroof System

Description

Auto operation does not operate

  • Auto operation of moonroof does not operate.

  • Moonroof stops halfway.

  • Anti-pinch function operates.

Diagnosis Procedure

CHECK GLASS LID

Check the following items:

  • Cracks, damage, or deformation of weather-strip.

  • Sticking of weather-strip.

  • Loose or missing glass lid mounting bolt.

  • Misalignment of glass lid.

    Refer to Adjustment.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK WIND DEFLECTOR

Check wind deflector for deformation and interference.

Refer to Removal and Installation.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK MOONROOF UNIT ASSEMBLY

Check the following items:

  • Damage, deformation or trapped foreign material of slide rail.

  • Insufficient application of grease to sliding section of slide rail.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace the malfunctioning parts.

PERFORM INITIALIZATION PROCEDURE

Initialization procedure is executed and operation is confirmed.

Refer to Description.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace the malfunctioning parts.

Sunshade

Description

Auto operation does not operate

  • Auto operation of sunshade does not operate.

  • Sunshade stops halfway.

  • Anti-pinch function operates.

Diagnosis Procedure

CHECK SUNSHADE

Check sunshade for damage, deformation, of interference with other parts.

Refer to Removal and Installation.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

PERFORM INITIALIZATION PROCEDURE

Initialization procedure is executed and operation is confirmed.

Refer to Description.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

GO TO 3.

CHECK COMMUNICATION CIRCUIT

Check communication circuit.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

Replace sunshade motor assembly. Refer to Removal and Installation.

NO>>

Repair or replace the malfunctioning parts.

    Symptom Diagnosis. Moonroof Does Not Operate Properly
    Description Moonroof does not operate normally. Moonroof tilt up/down, open/close does not operate. Moonroof tilt up/down, open/close operation is slow. Judder occurs during ope...
    Symptom Diagnosis. Anti-Pinch Function Does Not Operate
    Moonroof System Diagnosis Procedure PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to Description. Is the inspection result normal? YES>> Inspect...

    Other materials:

    Vehicle Can Communication 4 Circuit
    Diagnosis Procedure CHECK NETWORK DIAGNOSIS Check the "Network diagnosis" results from CONSULT to see that the diagnostic CAN communication circuit have no malfunction. Are the diagnostic CAN communication circuit normal? YES>> GO TO 2. NO>> Check and repair diagnostic CAN commu ...

    Removal and Installation. Driver Seat Control Unit
    Removal and Installation REMOVALRemove driver seat. Refer to Removal and Installation. Disconnect driver seat control unit connector. Remove fixing screws , and then remove driver seat control unit . INSTALLATIONInstall in the reverse order of removal.CAUTION: Be sure to perform ADDITIONAL SE ...

    Adjustment of Steering Angle Sensor Neutral Position
    Description Always adjust the neutral position of steering angle sensor before driving when the following operation is performed. Refer to Work Procedure.×: Required —: Not required Procedure Adjust the neutral position of steering angle sensor Removing/ installing ABS actuator and elect ...