Nissan Rogue (T33) 2021-Present Service Manual: P1526 Ascd System

Nissan Rogue (T33) 2021-Present Service Manual / Engine :: Engine Control System / Kr15ddt :: Dtc/circuit Diagnosis / P1526 Ascd System

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
P1526 00

Nissan Ariya Vehicle speed sensor

(Vehicle speed sensor) 		Diagnosis condition Ignition switch ON
Signal CAN communication signal
Threshold ECM cannot receive a communication signal sent from VDC (Nissan Ariya vehicle dynamics control system)
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

  • Harness or connectors (The CAN communication line is open or shorted.)

  • VDC（Nissan Ariya vehicle dynamics control system）

FAIL-SAFE

Not applicable

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

  1. Turn ignition switch ON and wait at least 3 seconds.

  2. Check DTC.

Is DTC detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

DTC Diagnosis Procedure

Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.

    P14c1 Brake Switch
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P14C1 00 CCS brake pedal SW (BCM) Diagnosis condition Ignition s...
    P1536 Ascd System
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P1536 00 Cruise control (Cruise control) Diagnosis condition Ign...

    Other materials:

    B24a2-55 Configuration Not Implement
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B24A2-55 Configuration not implement (Configuration not implement) Diagnosis condition Ignition switch ON Signal (Terminal) — Threshold Nissan Ari ...

    System Description. Diagnosis System (hands Free Module)
    Diagnosis Description APPLICATION ITEMCONSULT performs the following functions via CAN communication with Intelligent Key unit: Diagnosis mode Function Self diagnosis result Display non-network DTC which Intelligent Key unit memorizes ECU identification The Intelligent Key unit part ...

    Removal and Installation. Front Door Finisher
    Exploded View Driver side Front door panel Inside seal Front door finisher Pull handle cap Inside handle cap Inside handle finisher Inside handle Grommet Power window switch finisher Door corner cover         : Clip ...