Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Auto Anti-Dazzling Inside Mirror Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Driver Controls :: Mirrors / Symptom Diagnosis :: Auto Anti-Dazzling Inside Mirror Does Not Operate

Diagnosis Procedure

CHECK AUTO-ANTI DAZZLING INSIDE MIRROR SYSTEM

Check auto anti-dazzling inside mirror system.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

REPLACE INSIDE MIRROR

  1. Removal and Installation

Is the result normal?

YES>>

Inspection End

NO>>

Check intermittent incident. Refer to Intermittent Incident

    Symptom Diagnosis. Reverse Interlock Door Mirror Does Not Operate
    Diagnosis Procedure CHECK DTC Check DTC for Electric Shift control module. Refer to DTC Index. Is the inspection result normal? YES>> GO TO 2. NO>> Repair replace th...
    Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses
    Work Flow CUSTOMER INTERVIEWInterview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview t...

    Other materials:

    U214f-57 Mac Comm Error (bcm)
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U214F 57 CAN comm err (BCM) [Controller area network communication error (Body control module)] Diagnosis condition — Signal (t ...

    Diagnosis System (bcm)
    Air Conditioner CONSULT Function (BCM) Active test Test item Operation Description PTC relay-1 OFF/ON PTC heater relay 1 is turned OFF/ON. PTC relay-2 OFF/ON PTC heater relay 2 is turned OFF/ON. PTC relay-3 OFF/ON PTC heater relay 3 is turned OFF/ON. ...

    Dtc/circuit Diagnosis. P161e-00 Immobilizer
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition P161E-00 IMMOBILIZER (Immobilizer) Diagnosis condition Ignition switch ON Signal (terminal) — Threshold When CONSULT is not used during ECM replac ...