Nissan Rogue (T33) 2021-Present Service Manual: Switching Signal Circuit

Nissan Rogue (T33) 2021-Present Service Manual / Cruise Control & Driver Assistance :: Driver Assistance System / Driver Assistance System :: Dtc/circuit Diagnosis / Switching Signal Circuit

Side Radar Front Rh

Diagnosis Procedure

CHECK CONNECTOR

  1. Turn the ignition switch OFF.

  2. Check the terminals and connectors of the side radar front LH/RH for damage, bend and short (unit side and connector side).

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminal or connector.

CHECK CONTINUITY OF RIGHT/LEFT SWITCHING SIGNAL CIRCUIT

  1. Disconnect side radar front LH/RH connector.

  2. Check continuity between side radar front LH/RH harness connector and ground.

Side radar front RH Ground Continuity
Connector Terminal
E136 10 Yes

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair harness or connector.

Side Radar Rear Rh

Diagnosis Procedure

CHECK CONNECTOR

  1. Turn the ignition switch OFF.

  2. Check the terminals and connectors of the side radar rear LH/RH for damage, bend and short (unit side and connector side).

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminal or connector.

CHECK CONTINUITY OF RIGHT/LEFT SWITCHING SIGNAL CIRCUIT

  1. Disconnect side radar rear LH/RH connector.

  2. Check continuity between side radar rear LH/RH harness connector and ground.

Side radar rear RH Ground Continuity
Connector Terminal

B462*1

B468*2		 9 Yes

*1: Without ProPILOT Assist 2.1

*2: With ProPILOT Assist 2.1

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair harness or connector.

    Power Supply and Ground Circuit
    Side Radar Front Lh Diagnosis Procedure CHECK FUSE Check that the following fuse is not blown: Signal name Fuse No. Ignition power supply 9 (10 A) Is the fuse blown? YES>>...
    Steering Assist Switch Circuit
    Component Inspection CHECK STEERING ASSIST SWITCH Turn ignition switch ON. Check the display of "Switch2" in data monitor item of "ICC/ADAS 2" under the following conditions. Mo...

    Other materials:

    I-BSI system limitations
    WARNING The following limitations apply to the Intelligent Blind Spot Intervention system. Failure to operate your vehicle in accordance with these limitations could result in serious injury or death. The I-BSI system cannot detect every vehicle under all driving conditions. The radar s ...

    B24a4-11 Intake Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B24A4-11 INTAKE SENSOR (Intake sensor) Diagnosis condition Ignition switch ON Signal (Terminal) Intake sensor signal Threshold The intake sensor rec ...

    P14ac Charge Air Cooler Cooling Electric Water Pump
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P14AC Charge air cooler cooling electric W/P (Charge air cooler cooling electric water pump) Diagnosis condition Engine running at idle Warm-up conditio ...