Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Steering Assist switch (models with ProPILOT Assist)

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide / Instruments and controls / Steering Assist switch (models with ProPILOT Assist)

Nissan Rogue. Steering Assist switch (models with ProPILOT

The Steering Assist switch allows you to temporarily turn the Steering Assist system on or off whenever needed.

You can also enable or disable Steering Assist via the “Driver Assistance” menu in the vehicle information display.

The Steering Assist system adjusts steering to help keep the Nissan Rogue centered within its lane during driving, providing an added layer of support and convenience.

    Heated seats
    WARNING Do not use, or allow others to use, the seat heater if you or the occupant cannot monitor seat temperature or have reduced ability to feel pain in areas contacting the s...
    Rear Door Alert
    The Rear Door Alert system helps remind the driver to check the rear seat(s) before leaving the Nissan Rogue. Under certain conditions, the system indicates that an object or pa...

    Other materials:

    System Description. System
    Srs Air Bag Control System System Description SYSTEM DIAGRAM Component Function Occupant detection system sensor Refer to Occupant Detection System Sensor. Occupant detection system control unit Refer to Occupant Detection System Control Unit. Crash zone sensor Refer to Cras ...

    Symptom Diagnosis. Door Does Not Lock/unlock with Intelligent Key
    Description All doors do not lock/unlock using Intelligent Key button.NOTE: Before starting diagnosis check that vehicle condition is as shown in “Conditions of Nissan Ariya vehicle”, and check each symptom. SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) Door lock operation ...

    Basic Inspection. Battery Inspection
    How to Handle Battery CAUTION: If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery. After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact. METHODS OF PREVENTING OVER- ...