Nissan Rogue (T33) 2021-Present Service Manual: Service Data and Specifications (sds)

Nissan Rogue (T33) 2021-Present Service Manual / Suspension :: Rear Suspension / Service Data and Specifications (sds)

Wheel Alignment

JAPAN PRODUCTION MODELS
Item			Standard
Camber Degree minute (Decimal degree)		Minimum	–1° 20′ (–1.33°)
		Nominal	–0° 35′ (–0.58°)
		Maximum	0° 10′ (0.17°)
Toe-in	Total toe-in Distance	Minimum	In 0.5 mm (In 0.02 in)
		Nominal	In 3.0 mm (In 0.12 in)
		Maximum	In 5.5 mm (In 0.22 in)
	Total toe-angle Degree minute (Decimal degree)	Minimum	In 0° 02′ (In 0.03°)
		Nominal	In 0° 14′ (In 0.23°)
		Maximum	In 0° 26′ (In 0.43°)

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

NORTH AMERICAN PRODUCTION MODELS
Item			Standard
Camber Degree minute (Decimal degree)		Minimum	–1° 20′ (–1.33°)
		Nominal	–0° 35′ (–0.58°)
		Maximum	0° 10′ (0.17°)
Toe-in	Total toe-in Distance	Minimum	In 0.0 mm (In 0.00 in)
		Nominal	In 3.0 mm (In 0.12 in)
		Maximum	In 6.0 mm (In 0.24 in)
	Total toe-angle Degree minute (Decimal degree)	Minimum	Out 0° 03′ (Out 0.05°)
		Nominal	In 0° 14′ (In 0.23°)
		Maximum	In 0° 32′ (In 0.53°)

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

Ball Joint

Item	Standard
Swing torque	0.5 – 3.4 N·m (0.06 – 0.34 kg-m, 5 – 30 in-lb)
Measurement on spring balance	13.5 – 91.9 N (1.4 – 9.4 kg, 3 – 21 lb)

Wheelarch Height

JAPAN PRODUCTION MODELS

2WD

Item	Standard
Tire size	235/65R17	235/60R18	235/55R19
Front (Hf)	829 mm (32.64 in)	828 mm (32.60 in)	830 mm (32.68 in)
Rear (Hr)	832 mm (32.76 in)	832 mm (32.76 in)	833 mm (32.80 in)

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

AWD

Item	Standard
Tire size	235/65R17	235/60R18	235/55R19
Front (Hf)	829 mm (32.64 in)	828 mm (32.60 in)	829 mm (32.64 in)
Rear (Hr)	831 mm (32.72 in)	831 mm (32.72 in)	832 mm (32.76 in)

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

NORTH AMERICA PRODUCTION MODELS

2WD

Item	Standard
Tire size	235/65R17	235/60R18	235/55R19
Front (Hf)	828 mm (32.60 in)	828 mm (32.60 in)	829 mm (32.64 in)
Rear (Hr)	831 mm (32.72 in)	831 mm (32.72 in)	832 mm (32.76 in)

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

AWD

Item	Standard
Tire size	235/65R17	235/60R18	235/55R19
Front (Hf)	827 mm (32.56 in)	827 mm (32.56 in)	829 mm (32.64 in)
Rear (Hr)	830 mm (32.68 in)	830 mm (32.68 in)	831 mm (32.72 in)

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

 Removal and Installation. Rear Suspension Member

Exploded View JAPAN PRODUCTION MODELS Rear suspension member Rear suspension member stay (right side) Rear suspension member stay protector (right side) Rear suspension member s...

 Suspension. Road Wheels & Tires

Other materials:

Basic Inspection. System Setting
Description The settings of the automatic driving positioner system can be changed, using information display in the combination meter and the set switch. Always check the settings before and after replacing driver seat control unit. For details, refer to Work Procedure.×: ApplicableSetting ...

Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit
DTC Index DTC Display item Brake warning lamp Brake system warning lamp Refer to B14E0-02 Wheel sensor OFF ON DTC Description B14E0-09 Wheel sensor OFF ON DTC Description B14E0-11 Wheel sensor OFF ON DTC Description B14E0-12 Wheel sensor ...

Torque Converter and Converter Housing Oil Seal
Exploded View 1. Torque converter 2. Converter housing oil seal 3. Transaxle assembly : Always replace after every disassembly. : Apply CVT fluid Disassembly Remove transaxle assembly. Refer to Removal and Installation. Remove torque converter from transaxle as ...