Nissan Rogue (T33) 2021-Present Service Manual: Removal and Installation :: Automatic Back Door Warning Buzzer

Removal and Installation

REMOVAL

FOR USA AND JAPAN EARLY PRODUCTION AND USA LATE PRODUCTION

Remove rear bumper fascia. Refer to Removal and Installation.

Remove the automatic back door warning buzzer mounting nuts (A), and then remove automatic back door warning buzzer (1).

INSTALLATION

Installalation is in the reverse order of removal.

JAPAN LATE PRODUCTION

Automatic back door warning buzzer is part of the Intelligent Key warning buzzer. Refer to Removal and Installation.

    Removal and Installation. Automatic Back Door Lock and Close Switch Assembly
    Removal and Installation REMOVALRemove automatic back door lock and close switch assembly and automatic back door close switch finisher. Refer to Removal and Installation. Remov...
    Body Exterior, Doors, Roof & Vehicle Security. Security Control System

    Other materials:

    Transfer Oil Temperature Sensor
    Component Inspection CHECK TRANSFER OIL TEMPERATURE SENSOR Ignition switch OFF. Remove transfer oil temperature sensor. Refer to Removal and Installation. Check the resistance between transfer oil temperature sensor connector terminals. Make measuring condition using burning hot ...

    Timing Chain
    Exploded View 1. Slack guide 2. Timing chain tensioner 3. Oil level gauge guide 4. Oil level gauge 5. Timing chain 6. O-ring 7. O-ring 8. O-ring 9. O-ring 10. Oil filter 11. Valve timing control cover 12. O-ring 13. E ...

    Removal and Installation. Battery
    Exploded View 1. Battery positive terminal cover 2. Positive cable 3. Battery terminal with fusible link 4. Battery positive terminal 5. Battery protector 6. Battery mounting bracket 7. Battery tray 1 8. Battery tray 2 9. Battery cover 10 ...