Nissan Rogue (T33) 2021-Present Service Manual: Rear Propeller Shaft: Cvj-Cvj-C :: Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting

Nissan Rogue (T33) 2021-Present Service Manual / Transmission & Driveline :: Driveline / Rear Propeller Shaft: Cvj-Cvj-C :: Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting

Noise, Vibration and Harshness (nvh) Troubleshooting

NVH Troubleshooting Chart

Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts.

Possible cause and SUSPECTED PARTS Symptom Reference
Noise Shake Vibration
Uneven rotating torque ×   × Inspection
Center bearing improper installation × × × Exploded View
Excessive center bearing axial end play ×   × Inspection
Center bearing mounting (insulator) cracks, damage or deterioration ×   × Inspection
Excessive joint angle × × × Inspection
Rotation imbalance ×   × Inspection
Excessive runout ×   × Inspection
DIFFERENTIAL ×     NVH of REAR FINAL DRIVE in this section.
AXLE AND SUSPENSION × × × NVH in FAX, RAX, FSU, and RSU section.
TIRE × × × NVH in WT section.
ROAD WHEEL × ×   NVH in WT section.
DRIVE SHAFT × × × NVH in FAX and RAX section.
BRAKE × ×   NVH in BR section.
STEERING × × × NVH in ST section.

×: Applicable

    Rear Propeller Shaft: Cvj-Cvj-C. System Description. Structure and Operation
    Structure and Operation Sectional View PART OF JOINTUniversal Type (Shell Type)CVJ Type
    Rear Propeller Shaft: Cvj-Cvj-C. Periodic Maintenance. Rear Propeller Shaft
    Rear Propeller Shaft Inspection LOOSENESS OF CONNECTED PARTCheck each fixing bolt and nut for looseness using torque wrench. For each tightening torque, refer to Exploded View.B...

    Other materials:

    U0076-00 Can Comm Circuit
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition U0076 00 Control module communication Bus D Off Diagnosis condition When ignition switch is ON. Signal (terminal) CAN communication signal Threshold Not transmitting. Diagn ...

    Propilot Assist 2.1. Basic Inspection
    Diagnosis and Repair Work Flow Work Flow OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully. NOTE: The customers ar ...

    Dtc/circuit Diagnosis. C18ec-01 Stroke Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C18EC 01 Stroke sensor Diagnosis condition When Ignition switch is ON. Signal (terminal) — Threshold When a malfunction is detected in stroke sensor output. Diagnosis del ...