Nissan Rogue (T33) 2021-Present Service Manual: Preparation

Commercial Service Tools

Tool Description
Power tool

Loosening screws

Sealant or/and Lubricant

Name Description
Primer (3M K500, K520 or equivalent) Primer for attaching sonar sensor holder to bumper
    Precaution
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER...
    System Description. Component Parts
    Component Parts Location With 8" Color Display No. Component Function 1. Rear sonar sensor RH inner Refer to Sonar Sensor. 2. Rear sonar sensor RH outer 3. Sonar control unit Re...

    Other materials:

    Roof rack
    Type A The roof rack system of the Nissan Rogue is designed for use only with properly installed cross bars. Never place any cargo directly on the roof side rails, as cross bars are required to support the load safely and maintain structural balance. The service load capacity of the roof side ra ...

    Crankshaft Position Sensor
    Component Inspection CHECK CRANKSHAFT POSITION SENSOR (POS)-1 Turn ignition switch OFF. Loosen the fixing bolt of the sensor. Disconnect crankshaft position sensor (POS) harness connector. Remove the sensor. Visually check the sensor for chipping. Is the inspection r ...

    Basic Inspection. Consult/gst Checking System
    Description When CONSULT/GST is connected with a data link connector equipped on the Nissan Ariya vehicle side, it will communicate with the control unit equipped in the vehicle and then enable various kinds of diagnostic tests. : Instrument lower panel Refer to CONSULT S ...