Nissan Rogue Service Manual: Periodic maintenance

System description

DESCRIPTION Engine Lubrication System Camshaft (INT)  Chain tensioner Main gallery  Oil pan Oil cooler Balancer unit  Oil pan oil gallery Oil filter (with re ...

Engine oil

Inspection ENGINE OIL LEVEL NOTE: Before starting engine, put vehicle horizontally and check the engine oil level. If engine is already started, stop it and allow 5 minutes before checking. ...

Other materials:

System description
COMPONENT PARTS Component Parts Location Right rear wheel area Instrument panel Engine compartment  Left side of instrument panel (view with trim panel removed) No. Part Function 1 Optical sensor Refer to EXL-140, "Optical Senso ...

Calibration of decel G sensor
Description CAUTION: Always perform the decel G sensor calibration before driving when the following operation is performed. NOTE: Yaw rate/side/decel G sensor calibration is performed when performing the decel G sensor calibration. Work Procedure Decel G sensor calibration CAUTION: ...

Power supply and ground circuit
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram". 1. CHECK FUSE Check that the following fuse is not blown. Is the fuse blo ...