Nissan Rogue (T33) 2021-Present Service Manual: Kr15ddt :: Preparation. Preparation

Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number

(TechMate No.)

Tool name
  Description

EG17651130

( — )

Radiator cap tester adapter

  • Radiator cap tester connecting adapter used for inspecting radiator cap and checking for coolant leakage.

  • Dimensions of reservoir tank cap fitting part

    Outside diameter : 45 mm ( 1.77 in )

    Thread pitch : 3.0 mm ( 0.12 in )

KV991J0070

(NI-45695-A)

Coolant refill tool

Refilling engine cooling system

Cooling system pressure test kit

  • — (NI-51771-1) Main body

  • — (NI-51771-4) Small diameter

  • — (NI-51771-5) Pump with quick release

  • — (NI-51771-9) Radiator cap assembly with quick coupler

Checking cooling system

Commercial Service Tool

Tool name Description
Radiator cap tester

Checking radiator and radiator cap

Always Replace with New Parts

Never Reuse These Parts Part Code For additional information:
O-ring Exploded ViewExploded ViewExploded View
Radiator drain cock 21560F Exploded View
Rubber ring 21049M Exploded ViewExploded View
O-ring 21049MA Exploded View
Gasket 15192H Exploded View
    Kr15ddt. Precaution. Precautions
    Precautions Precautions for Removing Battery Terminal With the adoption of Auto ACC function, ACC power is automatically supplied by operating the Intelligent Key or remote keyl...
    Kr15ddt. System Description. Description
    Description Engine Cooling System Water pump Water pump housing Oil cooler Multi-way control valve Turbocharger assembly EGR cooler From reservoir tank From CVT oil warmer To el...

    Other materials:

    System Description. System
    Srs Air Bag Control System System Description SYSTEM DIAGRAM Component Function Occupant detection system sensor Refer to Occupant Detection System Sensor. Occupant detection system control unit Refer to Occupant Detection System Control Unit. Crash zone sensor Refer to Cras ...

    Distance Sensor Inspection
    Work Procedure CAUTION: In the following conditions, the distance sensor may not perform optimally. Attaching stickers or installing aftermarket parts around the distance sensor. Repairs performed by the customer. Scratches, bird droppings, insects, mud, etc., around the distance se ...

    Removal and Installation. Driver Seat Control Unit
    Removal and Installation REMOVALRemove driver seat. Refer to Removal and Installation. Disconnect driver seat control unit connector. Remove fixing screws , and then remove driver seat control unit . INSTALLATIONInstall in the reverse order of removal.CAUTION: Be sure to perform ADDITIONAL SE ...