Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: ECO mode
Basic information
Optimizes engine and transmission behavior for improved fuel economy, offering smoother starts and steady cruising.
NOTE:
ECO mode does not guarantee better fuel economy in all conditions.
Operation
Select ECO mode using the Drive Mode Selector. The ECO indicator will illuminate.
When the accelerator pedal stays within the ECO driving range, the ECO indicator glows green. If pedal input exceeds the range, the indicator turns off.
The indicator will not illuminate when:
- The shift lever is in R (Reverse).
- Vehicle speed is below 2 MPH (3.2 km/h) or above 90 MPH (144 km/h).
- Cruise Control or Intelligent Cruise Control is active.
ECO Mode Customize
Additional ECO systems—Cruise Control, Idling Stop, and Air Conditioning—can be customized for greater fuel savings when ECO mode is active.
- Cruise Control: Reduces acceleration targets to improve cruising efficiency.
- Idling Stop: Extends stop time under certain conditions when using A/C.
- Air Conditioning: Limits A/C performance for better fuel efficiency.
NOTE:
When vehicle speed drops significantly (such as on an uphill road), returning to the previously set cruising speed may take longer in ECO mode.
STANDARD (2WD) / AUTO (AWD)
Ideal for everyday driving.
This is the default mode whenever the Nissan Rogue ignition is turned ON. ...
Tire Pres ECO advice
This feature displays a tire pressure ECO reminder on the vehicle information display when low tire pressure is detected.
When active, the Nissan Rogue will show “Check Tire Pressures for Best Fuel ...
Other materials:
Wiper and washer system symptoms
Symptom Table
CAUTION:
Perform the self-diagnosis with CONSULT before performing the diagnosis by
symptom. Perform the
diagnosis by DTC if DTC is detected.
...
ECU diagnosis information
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE
ROOM)
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
1: With Intelligent Key system
2: With remote keyless entry
Fail-safe
CAN COMMUNICATION CONTROL
When CAN communicati ...
Power seat switch
Exploded View
Seat cushion outer finisher
Power seat switch
Removal and Installation
REMOVAL
NOTE:
LH shown, RH similar.
Using a suitable tool release clips and remove seat cushion
outer finisher (1).
: Clip
Disconnect harness connector from power seat switch.
...
