Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: Sliding Switch

Nissan Rogue (T33) 2021-Present Service Manual / Body Interior :: Automatic Drive Positioner / Dtc/circuit Diagnosis :: Sliding Switch

Component Function Check

CHECK FUNCTION

CONSULT

  1. Ignition switch ON.

  2. Select “Sliding switch (Forward)” and “Sliding switch (Backward)” in “Data monitor” mode of “DRIVER SEAT”.

  3. Check sliding switch signal under the following conditions.

Monitor item Condition Status
Sliding switch (Forward) Sliding switch Operate (forward) On
Release Off
Sliding switch (Backward) Sliding switch Operate (backward) On
Release Off

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK SLIDING SWITCH POWER SUPPLY VOLTAGE

  1. Ignition switch OFF.

  2. Disconnect power seat switch LH connector.

  3. Ignition switch ON.

  4. Check voltage between power seat switch LH harness connector and ground.

    (+) (-)

    Voltage

    (Approx.)
    Power seat switch LH
    Connector Terminal
    B215 1 Ground 5 V

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

GO TO 2.

CHECK SLIDING SWITCH SIGNAL CIRCUIT (OPEN)

  1. Ignition switch OFF.

  2. Disconnect driver seat control unit connector.

  3. Check continuity between power seat switch LH harness connector and driver seat control unit harness connector.

    Power seat switch LH Driver seat control unit Continuity
    Connector Terminal Connector Terminal
    B215 1 B213 31 Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair the harness or connector.

CHECK SLIDING SWITCH SIGNAL CIRCUIT (SHORT TO GROUND)

Check continuity between power seat switch LH harness connector and ground.

Power seat switch LH (—) Continuity
Connector Terminal
B215 1 Ground No

Is the inspection result normal?

YES>>

Replace driver seat control unit. Refer to Removal and Installation.

NO>>

Repair the harness or connector.

CHECK SLIDING SWITCH

Check sliding switch. Refer to Component Inspection.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace power seat switch LH. Refer to Removal and Installation.

Component Inspection

CHECK SLIDING SWITCH

  1. Ignition switch OFF.

  2. Disconnect power seat switch LH connector.

  3. Check resistance between power seat switch LH terminals.

    Power seat switch LH Condition Resistance: kΩ
    Terminal
    1 4 Sliding switch Operate (forward) 4.485 – 4.575
    Operate (backward) 2.673 – 2.727
    Release 29.700 – 30.300

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace power seat switch LH. Refer to Removal and Installation.

    Dtc/circuit Diagnosis. Power Supply and Ground Circuit (driver Seat Control Unit)
    Diagnosis Procedure CHECK FUSE Ignition switch OFF. Check that the following fuse is not blown (open). Signal name Fuse No. Battery power supply 54 (20A) Is the fuse blown (open...
    Dtc/circuit Diagnosis. Reclining Switch
    Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Reclining switch (Forward)” and “Reclining switch (Backward)” in “Data monitor” mode of ...

    Other materials:

    P00d2 Ho2s2 Heater
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P00D2 00 Heated O2 sensor heater B1 sensor 2 (HO2S heater control circuit range/performance bank 1 sensor 2) Diagnosis condition — Signal (terminal) ...

    Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses
    Work Flow CUSTOMER INTERVIEWInterview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of customer's comments; Refer to Diagnostic Work ...

    Brake assist
    Brake assist When brake pedal force exceeds a certain threshold, Brake Assist activates to provide greater braking force than a conventional brake booster, even with relatively light pedal pressure. WARNING Brake Assist supports braking but does not replace careful driving. It is not a collision wa ...