Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: P161f-00 Immobilizer
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC detecting condition | |
|---|---|---|---|
| P161F-00 |
IMMOBILIZER (Immobilizer) |
Diagnosis condition | Ignition switch ON |
| Signal (terminal) | — | ||
| Threshold | When Intelligent Key unit detects an immobilizer malfunction and engine start is prohibited. | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
-
ECM
-
Intelligent Key unit
-
Electric shift control module
-
Power steering control module
-
Battery
FAIL-SAFE
Fuel cut
CONFIRMATION PROCEDURE
CHECK BATTERY CONDITION
Check battery condition. Refer to Work Flow.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace 12V battery. Refer to Removal and Installation.
CHECK DTC PRIORITY
If DTC P161F-00 is dsplayed with DTC U214F-87, B2033-4A, B2042-4A, B2043-4A, B2044-4A, B2045-4A, or B2047-87 first perform the trouble diagnosis for DTC U214F-87, B2033-4A, B2042-4A, B2043-4A, B2044-4A, B2045-4A, or B2047-87.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable DTC. U214F-87: DTC Description. B2033-4A: DTC Description. B2042-4A: DTC Description. B2043-4A: DTC Description. B2044-4A: DTC Description. B2045-4A: DTC Description. B2047-87: DTC Description.
NO>>GO TO 3.
DTC CONFIRMATION
CONSULT
-
Ignition switch ON.
-
Select “Self diagnosis result” mode of “ECM”.
Is the DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: Inspection End.
DTC Diagnosis Procedure
CHECK BATTERY CONDITION
Check battery condition. Refer to Work Flow.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace 12V battery. Refer to Removal and Installation.
CHECK DTC PRIORITY
If DTC P161F-00 is dsplayed with DTC U214F-87, B2033-4A, B2042-4A, B2043-4A, B2044-4A, B2045-4A, or B2047-87 first perform the trouble diagnosis for DTC U214F-87, B2033-4A, B2042-4A, B2043-4A, B2044-4A, B2045-4A, or B2047-87.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable DTC. U214F-87: DTC Description. B2033-4A: DTC Description. B2042-4A: DTC Description. B2043-4A: DTC Description. B2044-4A: DTC Description. B2045-4A: DTC Description. B2047-87: DTC Description.
NO>>GO TO 3.
CHECK ENGINE START
Ignition switch ON under the following conditions and wait 1 second or more:
-
Selector lever: In the P position or N position
-
Brake pedal: Depressed
Does the engine start?
YES>>Clear DTC. Inspection End.
NO>>GO TO 4.
REPLACE ECM
Replace ECM. Refer to ECM : Removal & Installation.
>>
Inspection End.
Other materials:
P0106 Manifold Absolute Pressure Sensor
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0106
00
ABSL PRES SEN/CIRC
(Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance)
Diagnosis condition
—
Signal (terminal)
...
Corrosion protection
Most common factors contributing to vehicle corrosion
Moisture-retaining dirt and debris build-up inside body cavities or seams.
Paint or coating damage caused by gravel, small stones or minor collisions.
Environmental factors influencing corrosion rate
Moisture
Sand, dirt and water accumulat ...
Intelligent Key operation (models with
request switch)
Example
Example
You can conveniently lock or unlock the doors of your Nissan Rogue without taking the key out of your pocket or bag.
When you carry the Intelligent Key with you, the Nissan Rogue allows controlling all doors by pressing the door handle request switch
A (front doors) or the liftg ...