Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: Back Door Request Switch

Component Inspection

CHECK BACK DOOR REQUEST SWITCH

  1. Ignition switch OFF.

  2. Disconnect back door opener switch connector.

  3. Check back door opener switch terminals.

Back door opener switch Condition Continuity
Terminal
3 4 Back door request switch Pressed Yes
Released No

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace back door opener switch. Refer to Removal and Installation.

    Dtc/circuit Diagnosis. Back Door Opener Switch
    Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Request switch back door/trunk lid” in “Data monitor” mode of "BCM [TRUNK]". Check that the f...
    Dtc/circuit Diagnosis. Door Lock Actuator
    Front Lh Diagnosis Procedure CHECK DOOR LOCK ACTUATOR INPUT SIGNAL Ignition switch OFF. Disconnect front door lock assembly LH connector. Check voltage between front door lock a...

    Other materials:

    Vehicle Security System
    System Description SYSTEM DIAGRAM Component Function Door switch Door switch detects door open/close condition and then transmits door switch signal to BCM. IPDM E/R IPDM E/R operates horns with horn request signal received from BCM. IPDM E/R operates headlamps with high be ...

    Dtc/circuit Diagnosis. Mood Lamp Control Circuit
    Component Function Check CAUTION: Before performing the diagnosis, check that the following are normal: Interior room lamp power supply circuit Mood lamp (center console) bulb (with ambient lighting) CHECK MOOD LAMP OPERATION CONSULT Open the front door LH. Ignition switc ...

    Intelligent Key operating range (models with request switch)
    The Intelligent Key functions on the Nissan Rogue operate only when the key is positioned within the designated range from the request switch 1. When the Intelligent Key battery is low or when strong radio interference is present near the vehicle, the effective operating range may decrease, causi ...