Nissan Rogue (T33) 2021-Present Service Manual: Diagnosis System (active Noise Control Unit)

CONSULT Function

CONSULT FUNCTIONS

CONSULT performs the following functions via communication with the active noise control unit.

Diagnosis mode Function
Self diagnosis result The active noise control unit self diagnosis results are displayed.
ECU identification The active noise control unit part number is displayed.
Work supports Changes setting of each function.
Data monitor The active noise control unit input/ouput data is displayed in real time.
Replace ECU Writes the Nissan Ariya vehicle specification when replacing the active noise control unit.

SELF DIAGNOSIS RESULT

Refer to DTC Index.

Freeze Frame Data (FFD)

The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.

Item name Display content

ODO/TRIP METER

[km]
Total driving distance (odometer value) upon DTC detection is displayed.

DTC count

[count]
The number of times the DTC is detected is displayed.

ECU IDENTIFICATION

The part number of active noise control unit is displayed.

WORK SUPPORTS

Item Remarks
Active Noise Control Setting Active Noise Control setting can be turned On/Off.
Active Sound Control Setting Active Sound Control setting can be turned On/Off.
Speaker connection test Performs a speaker connection test.

DATA MONITOR

Monitor Item Unit Description
Active sound control operating condition On/Off Indicates the operation status of the active sound control.
Active noise control operating condition On/Off Indicates the operation status of the active noise control.
Engine speed rpm Indicates the engine speed status.
Nissan Ariya VehicleSpeed 1 mph/kh/m Indicates the vehicle speed status.

REPLACE ECU

Writes the vehicle specification when replacing active noise control unit.

    Diagnosis System (av Control Unit)
    Nissanconnect with 8" Color Display On Board Diagnosis Function The AV control unit on board diagnosis performs the functions listed in the table below:DESCRIPTION Mode Descript...
    Nissanconnect. Ecu Diagnosis Information

    Other materials:

    Dtc/circuit Diagnosis. Rear Window Defogger
    Component Function Check CHECK REAR WINDOW DEFOGGER FUNCTION CONSULT Ignition switch ON. Select “Rear defogger” in “Active test” mode of "BCM". Touch “On”. Check that the back door window glass is getting warmer. NOTE: When glass is hot, never start inspection un ...

    Push-Button Ignition Switch Circuit
    Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Push switch” in “Data monitor” mode of “INTELLIGENT KEY”. Check the push-button ignition switch signal under the following conditions: Monitor item Condition Status Push switch Pus ...

    Manifold Absolute Pressure (map) Sensor
    Component Inspection CHECK MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR Turn ignition switch OFF. Remove manifold absolute pressure (MAP) sensor with its harness connector. Install pressure pump (A) to manifold absolute pressure (MAP) sensor. CAUTION: When insert a pressure pump hose ...