Nissan Rogue (T33) 2021-Present Service Manual: Diagnosis System (a/c Switch Assembly)

Diagnosis Description

DESCRIPTION

On board diagnosis of A/C switch assembly can be used to perform an operation check of the segment display and indicator lamps.

STARTING PROCEDURE

Starting Self-diagnosis Mode

The self-diagnosis function starts when the ON·OFF switch is pressed for 5 seconds or more within 10 seconds after the ignition switch places ON.

Ending Self-diagnosis Mode

Ignition switch OFF or press AUTO switch.

DIAGNOSIS DESCRIPTION

Check indicators of all A/C switch assembly switches and check all liquid crystal display segments.

When normal: All display parts and indicator lamps on A/C switch assembly turn ON.

Malfunction: The malfunctioning part does not turn ON, or does not display. (A/C switch assembly malfunction)

NOTE:

If on board diagnosis does not start, check A/C switch assembly power supply and the ground circuit. Refer to Diagnosis Procedure. If the result of the check is normal, replace A/C switch assembly. Refer to Removal and Installation.

    Diagnosis System (hvac)
    CONSULT Function CONSULT performs the following functions via CAN communication with A/C amp.: Diagnosis mode Function Self diagnosis result Display non-network DTC which A/C am...
    Diagnosis System (bcm)
    Air Conditioner CONSULT Function (BCM) Active test Test item Operation Description PTC relay-1 OFF/ON PTC heater relay 1 is turned OFF/ON. PTC relay-2 OFF/ON PTC heater relay 2 ...

    Other materials:

    Diagnosis System (chassis Control Module)
    Without Telematics System CONSULT Function APPLICATION ITEMSCONSULT can display each diagnostic item using the diagnostic test modes as follows. Diagnosis mode Description Self Diagnostic Result Display DTC which chassis control module memorizes Data monitor Displays chassis contr ...

    Rear-facing child restraint installation using LATCH
    For additional information, refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint. Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg). If the combined wei ...

    B120e-42 Ipdm E/r
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition B120E-42 IPDM E/R (Intelligent power distribution module engine room) [MEMORY ERROR] 1 Diagnosis condition When the power consumption control of IPDM E/R chan ...