Nissan Rogue (T33) 2021-Present Service Manual: Chassis Control :: Symptom Diagnosis. Chassis Control System
Chassis Control System
Symptom Table
INTELLIGENT TRACE CONTROL/ACTIVE RIDE CONTROL (IF EQUIPPED)
Perform self-diagnosis using CONSULT before the symptom diagnosis. Perform trouble diagnosis if any DTC is detected. Refer to DTC Index (Without telematics system) or DTC Index (With telematics system).
| Symptom | Possible cause | Inspection item | |
|---|---|---|---|
| Intelligent trace control inoperative/ineffective | No intelligent trace control assist | VDC OFF setting is engaged. | VDC OFF setting to the OFF. |
| Brake pad wear. | Check the brake pads and replace if necessary. | ||
| Certain roads, inclement weather or driving conditions. | System is functioning normally, confirm the driving condition with the customer. | ||
| Excessive lag on turns | Wheel alignment. | Repair alignment malfunction. | |
| Road wheel tire condition is abnormal. | Check the road wheel tire. | ||
| Road wheel tire size is abnormal. | |||
| Certain roads, inclement weather or driving conditions. | System is functioning normally, confirm the driving condition with the customer. | ||
| Active ride control inoperative/ineffective | No active ride control assist | VDC OFF setting is engaged. | VDC OFF setting to the OFF. |
| Brake pad wear. | Check the brake pads and replace if necessary. | ||
| Bumpy ride on bumpy road | Road wheel tire condition is abnormal. | Check the road wheel tire. | |
| Road wheel tire size is abnormal. | |||
| Certain roads, inclement weather or driving conditions. | System is functioning normally, confirm the driving condition with the customer. | ||
Other materials:
P2128 App Sensor
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P2128
00
APP SEN 2/CIRC
(Throttle/Pedal position sensor/switch E circuit high)
Diagnosis condition
Engine running at idle
Signal (terminal)
Accelerator ...
Chassis Control. Basic Inspection
Diagnosis and Repair Work Flow
Work Flow
DETAILED FLOWINTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform
an interview utilizing Diagnostic Work Sheet and reproduce the symptom
as well as fully understand it. Ask customer about his/her complaints
...
Basic Inspection. Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWINTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. To do so, reproduce
the symptom before hand and fully understand it. Then interview the
customer thoroughly. Check the symptoms by driving Nissan Ariya vehicle
with the customer, ...
