Nissan Rogue (T33) 2021-Present Service Manual: C1b92-82 Brake Control System

DTC Description

DTC DETECTION LOGIC

POSSIBLE CAUSE

ABS actuator and electric unit (control unit)

FAIL-SAFE

The following functions are suspended.

• Intelligent trace control function

• Active ride control function

• Automatic brake hold function

DTC CONFIRMATION PROCEDURE

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.

CHECK DTC DETECTION

With CONSULT

1. Ignition switch OFF to ON.

   CAUTION:

   Be sure to wait of 10 seconds after ignition switch OFF or ON.

2. Perform self-diagnosis for “CHASSIS CONTROL”.

Is DTC “C1B92-82” detected?

"CRNT" is displayed: Refer to Diagnosis Procedure.

"PAST" is displayed: INSPECTION END (Erase the memory of self-diagnosis results.)

To check malfunction symptom before repair: Refer to Intermittent Incident.

Confirmation after repair: INSPECTION END

Diagnosis Procedure

CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SYSTEM

With CONSULT

Perform self-diagnosis for “ABS”.

Is DTC detected?

Check the DTC. Refer to DTC Index.

GO TO 2.

ERASE SELF-DIAGNOSIS RESULT

With CONSULT

1. Erase self-diagnosis result for “CHASSIS CONTROL”.

2. Ignition switch OFF and wait for 10 seconds or more.

INSPECTION END