Nissan Rogue (T33) 2021-Present Service Manual: C1b93-82 Engine System

Nissan Rogue (T33) 2021-Present Service Manual / Cruise Control & Driver Assistance :: Driver Assistance System / Chassis Control :: Dtc/circuit Diagnosis / C1b93-82 Engine System

DTC Description

DTC DETECTION LOGIC

DTC No. CONSULT screen terms DTC detection condition
C1B93 82 Engine/HEV system Diagnosis condition When ignition switch is ON.
Signal (terminal) CAN communication signal
Threshold ECM is malfunctioning.
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

ECM

FAIL-SAFE

The following functions are suspended.

  • Intelligent trace control function

  • Active ride control function

  • Automatic brake hold function

DTC CONFIRMATION PROCEDURE

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always ignition switch OFF and wait at least 10 seconds before conducting the next test.

>>

GO TO 2.

CHECK DTC DETECTION

With CONSULT

  1. Ignition switch OFF to ON.

    CAUTION:

    Be sure to wait of 10 seconds after ignition switch OFF or ON.

  2. Perform self-diagnosis for “CHASSIS CONTROL”.

Is DTC “C1B93-82” detected?

YES-1>>

"CRNT" is displayed: Refer to Diagnosis Procedure.

YES-2>>

"PAST" is displayed: INSPECTION END (Erase the memory of self-diagnosis results.)

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

Diagnosis Procedure

CHECK ECM SYSTEM

With CONSULT

Perform self-diagnosis for “ENGINE”

Is DTC detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

GO TO 2.

ERASE SELF-DIAGNOSIS RESULT

With CONSULT

  1. Erase self-diagnosis result for “CHASSIS CONTROL”.

  2. Ignition switch OFF and wait for 10 seconds or more.

>>

INSPECTION END

    C1b92-82 Brake Control System
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C1B92 82 Brake control system Diagnosis condition When ignition switch is ON. Signal (te...
    C1b94-82 Transmission System
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C1B94 82 TM system Diagnosis condition When ignition switch is ON. Signal (terminal) CAN...

    Other materials:

    Lane Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the front camera unitfor damage, bend and loose connection (unit side and connector side). Is the inspection result no ...

    B2723-88 Corner Sensor [rr]
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen items (Trouble diagnosis content) DTC detection condition B2723-88 CORNER SENSOR [RR] (Corner sensor [RR]) Diagnosis condition When ignition switch is ON Signal (terminal) — Threshold Communication error D ...

    C10b1-01 Parking Brake Actuator (lh)
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C10B1 01 Parking brake actuator (LH) [Parking brake actuator (left)] Diagnosis condition When parking brake is apply or release Signal (terminal) — ...