Nissan Rogue (T33) 2021-Present Service Manual: Bcm

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / System Description :: Diagnosis System (bcm) / Bcm

CONSULT Function (BCM - BCM)

DATA MONITOR

NOTE:

The following table includes information [items] inapplicable to this Nissan Ariya vehicle. For information [items] applicable to this vehicle, refer to CONSULT display items.

Monitor item

[Unit] 		Description

Door switch assist

[Off/On] 		Indicates [On/Off] condition of front door switch RH.

Battery voltage (door lock 1)

[On/Off] 		Indicates [On/Off] condition of battery power supply (front door lock) status.

Rear wiper auto stop switch

[On/Off] 		Displays the status of the rear wiper stop position signal received from rear wiper motor.

Sport mode switch

[On/Off] 		Indicates [On/Off] condition of SPORT mode position in drive mode select switch.

Seat belt switch (driver)

[On/Off] 		Indicates [On/Off] condition of front seat belt buckle switch LH.

Battery voltage (wiper)

[On/Off] 		Indicates [On/Off] condition of battery power supply (rear wiper) status.

Battery voltage (door lock 2)

[On/Off] 		Indicates [On/Off] condition of battery power supply (rear door lock) status.

ECO mode switch

[On/Off] 		Indicates [On/Off] condition of ECO mode position in drive mode select switch.

Battery voltage (flasher)

[On/Off] 		Indicates [On/Off] condition of battery power supply (turn signal lamp) status.

Battery voltage (stop lamp)

[On/Off] 		Indicates [On/Off] condition of battery power supply (stop lamp) status.

Battery voltage (electric control unit)

[V] 		Indicates battery power supply value.

Drive mode select SW comm

[Error/No error] 		Indicates condition of drive mode select switch LIN communication status.

Power window operation FR

[Active/Not active] 		Indicates condition of front power window RH.

Power window operation RR

[Active/Not active] 		Indicates condition of rear power window RH.

Power window operation RL

[Active/Not active] 		Indicates condition of rear power window LH.

Power window operation FL

[Active/Not active] 		Indicates condition of front power window LH.

Power window request RR

[Request/No request/Not used] 		Indicates condition of power window main switch (rear RH).

Power window request RL

[Request/No request/Not used] 		Indicates condition of power window main switch (rear LH).

Power window request FR

[Request/No request/Not used] 		Indicates condition of power window main switch (front RH).

Power window request FL

[Request/No request/Not used] 		Indicates condition of power window main switch (front LH).

Back door/trunk

[On/Off] 		Indicates [On/Off] condition of back door lock assembly (ajar switch).

Back-up lamp output

[On/Off] 		Indicates [On/Off] condition of back-up lamp status.

High beam assist switch

[On/Off] 		Displays the status of the high beam assist switch in the combination switch judged by the BCM with the combination switch reading function.

Set air pressure 1-front left

[psi/mBar] 		Displays the standard air pressure of front tire LH.

Set temperature-rear left

[°F/°C] 		Displays the standard temperature of rear tire LH.

Tire internal temperature-rear left

[°F/°C] 		Displays the temperature of rear tire LH.

Warning air pressure-rear left

[psi/mBar] 		Displays the warning air pressure of rear tire LH.

Set air pressure 1-rear left

[psi/mBar] 		Displays the standard air pressure of rear tire LH.

Set air pressure 2-rear left

[psi/mBar] 		Displays the standard air pressure of rear tire LH.

Air pressure-rear left

[psi/mBar] 		Displays the air pressure of rear tire LH.

Set temperature-rear right

[°F/°C] 		Displays the standard temperature of rear tire RH.

Tire internal temperature-rear right

[°F/°C] 		Displays the temperature of rear tire RH.

Warning air pressure-rear right

[psi/mBar] 		Displays the warning air pressure of rear tire RH.

Set air pressure 1-rear right

[psi/mBar] 		Displays the standard air pressure of rear tire RH.

Set air pressure 2–rear right

[psi/mBar] 		Displays the standard air pressure of rear tire RH.

Air pressure-rear right

[psi/mBar] 		Displays the air pressure of rear tire RH.

Set temperature-front right

[°F/°C] 		Displays the standard temperature of front tire RH.

Tire internal temperature-front right

[°F/°C] 		Displays the temperature of front tire RH.

Warning air pressure-front right

[psi/mBar] 		Displays the warning air pressure of front tire RH.

Set air pressure 1-front right

[psi/mBar] 		Displays the standard air pressure of front tire RH.

Set air pressure 2-front right

[psi/mBar] 		Displays the standard air pressure of front tire RH.

Air pressure-front right

[psi/mBar] 		Displays the air pressure of front tire RH.

Nissan Ariya Vehicle speed

[mph/km/h] 		Displays the vehicle speed.

Set temperature-front left

[°F/°C] 		Displays the standard temperature of front tire LH.

Tire internal temperature-front left

[°F/°C] 		Displays the temperature of front tire LH.

Warning air pressure-front left

[psi/mBar] 		Displays the warning air pressure of front tire LH.

Set air pressure 2-front left

[psi/mBar] 		Displays the standard air pressure of front tire LH.

Air pressure-front left

[psi/mBar] 		Displays the air pressure of front tire LH.

Turn signal RH

[On/Off] 		Displays the status of the turn signal RH in the combination switch judged by the BCM with the combination switch reading function.

Turn signal LH

[On/Off] 		Displays the status of the turn signal LH in the combination switch judged by the BCM with the combination switch reading function.

Check diode 3

[On/Off] 		Displays the status of the check diode 3 in the combination switch judged by the BCM with the combination switch reading function.

Rear washer switch

[On/Off] 		Displays the status of the rear washer switch in the combination switch judged by the BCM with the combination switch reading function.

Tail lamp switch

[On/Off] 		Displays the status of the tail lamp switch in the combination switch judged by the BCM with the combination switch reading function.

AUTO light switch

[On/Off] 		Displays the status of the AUTO light switch in the combination switch judged by the BCM with the combination switch reading function.

Low beam switch

[On/Off] 		Displays the status of the low beam switch in the combination switch judged by the BCM with the combination switch reading function.

Tire status-rear left

[Normal/MALF 1/MALF 2/MALF 3/MALF 4] 		Displays the rear tire LH status.

Tire status-rear right

[Normal/MALF 1/MALF 2/MALF 3/MALF 4] 		Displays the rear tire RH status.

Tire status-front right

[Normal/MALF 1/MALF 2/MALF 3/MALF 4] 		Displays the front tire RH status.

Tire status-front left

[Normal/MALF 1/MALF 2/MALF 3/MALF 4] 		Displays the front tire LH status.

Set switch

[On/Off] 		Displays the set active status of set function.

Check diode 2

[On/Off] 		Displays the status of the check diode 2 in the combination switch judged by the BCM with the combination switch reading function.

Front fog switch

[On/Off] 		Displays the status of the front fog switch in the combination switch judged by the BCM with the combination switch reading function.

Rear fog switch

[On/Off] 		Displays the status of the rear fog switch in the combination switch judged by the BCM with the combination switch reading function.

Passing switch

[On/Off] 		Displays the status of the passing switch in the combination switch judged by the BCM with the combination switch reading function.

High beam switch

[On/Off] 		Displays the status of the high beam switch in the combination switch judged by the BCM with the combination switch reading function.

Request switch back door/trunk lid

[On/Off] 		Indicates [On/Off] condition of back door opener switch (request switch).

Back door/trunk opener switch

[On/Off] 		Indicates [On/Off] condition of back door opener switch.

Paddle shift switch (+)

[On/Off] 		Indicates [On/Off] condition of paddle shifter (shift up switch).

Paddle shift switch (-)

[On/Off] 		Indicates [On/Off] condition of paddle shifter [shift down switch].

Hazard switch

[Off/On] 		The switch status input from the hazard switch.

Brake switch 1

[On/Off] 		Indicates [On/Off] condition of stop lamp switch 1.

Brake switch 2

[On/Off] 		Indicates [On/Off] condition of stop lamp switch 2.

Back door/trunk lid switch

[On/Off] 		Indicates [On/Off] condition of back door lock assembly (ajar switch).

Rear wiper ON

[On/Off] 		Displays the status of the rear wiper ON in the combination switch judged by the BCM with the combination switch reading function.

Rear wiper INT

[On/Off] 		Displays the status of the rear wiper INT in the combination switch judged by the BCM with the combination switch reading function.

INT volume 3

[On/Off] 		Displays the status of the INT volume 3 in the combination switch judged by the BCM with the combination switch reading function.

Light OFF switch

[On/Off] 		Displays the status of the light OFF switch in the combination switch judged by the BCM with the combination switch reading function.

Check diode 4

[On/Off] 		Displays the status of the check diode 4 in the combination switch judged by the BCM with the combination switch reading function.

Front wiper INT

[On/Off] 		Displays the status of the front wiper INT in the combination switch judged by the BCM with the combination switch reading function.

Front wiper HI

[On/Off] 		Displays the status of the front wiper HI in the combination switch judged by the BCM with the combination switch reading function.

Stop/start switch

[On/Off] 		Indicates [ON/OFF] condition of start/stop OFF switch.

Door switch rear left

[On/Off] 		Indicates [On/Off] condition of rear door switch LH.

Detention/Cancel switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Ignition switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Clutch end switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Unlock sensor

[On/Off] 		Indicates [On/Off] condition of front door lock assembly LH (door unlock sensor) status.

Door switch driver

[On/Off] 		Indicates [On/Off] condition of front door switch LH.

Door lock and unlock switch (unlock)

[On/Off] 		Indicates [On/Off] condition of UNLOCK signal from door lock/ unlock switch.

Door lock and unlock switch (lock)

[On/Off] 		Indicates [On/Off] condition of LOCK signal from door lock/unlock switch.

Front wiper MIST

[On/Off] 		Displays the status of the front wiper MIST in the combination switch judged by the BCM with the combination switch reading function.

Check diode 5

[On/Off] 		Displays the status of the check diode 5 in the combination switch judged by the BCM with the combination switch reading function.

Back door/trunk status

[Open/Close] 		Indicates [Open/Close] condition of back door.
    Battery Saver
    CONSULT Function (BCM - BATTERY SAVER) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) appl...
    Comb Sw
    CONSULT Function (BCM - COMB SW) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable...

    Other materials:

    It Can Communication Circuit
    Diagnosis Procedure CHECK NETWORK DIAGNOSIS Check the "Network diagnosis" results from CONSULT to see that the diagnostic CAN communication circuit have no malfunction. Are the diagnostic CAN communication circuit normal? YES>> GO TO 2. NO>> Check and repair diagnostic CAN commu ...

    C1203-86 Abs Signal
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detecting condition C1203-86 ABS SYSTEM (Antilock brake system) Diagnosis condition Ignition switch: ON Nissan Ariya Vehicle running Signal Wheel speed signals ...

    System
    Propilot Assist 2.1 System Description SYSTEM DIAGRAM Component Description ADAS control unit 2 ADAS Control Unit GNSS antenna ROOF ANTENNA AND ANTENNA FEEDER HD map module HD MAP MODULE Front camera unit Front Camera Unit Steering assist switch Steering As ...