Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Intelligent Key Interlock Storing

Description

Always perform the Intelligent Key interlock function storage when the driver seat control unit is replaced. The Intelligent Key interlock function will not operate normally if no memory storage is performed. For details, refer to Work Procedure.

Work Procedure

Intelligent Key Interlock Storage Procedure

Performing the following operation associates the registered driving position with Intelligent Key. When driver door unlock operation is performed by Intelligent Key or driver door request switch, display of the registered driving position and turnout operation can be performed.

STEP 1

Check the following conditions.

• Ignition switch : OFF

• Driving position : Registered

• All door: Locked

GO TO 2.

STEP 2

1. Push set switch.

   NOTE:

   Memory indicator for which driver seat position is already retained in memory is illuminated for 5 seconds.

2. Push the Intelligent Key unlock button within 5 seconds after pushing memory switch (while the memory indicator is turned ON).

   NOTE:

   From the time registration is performed, the applicable memory indicator blinks for 5 seconds.

GO TO 3.

STEP 3

Confirm the operation of each part with memory operation and Intelligent Key interlock operation.

Work End.