Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Inspection and Adjustment. Additional Service When Removing Battery Negative Terminal

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Power Supply, Ground & Circuit Elements / Basic Inspection :: Inspection and Adjustment. Additional Service When Removing Battery Negative Terminal

Additional Service When Removing Battery Negative Terminal

Required Procedure After Battery Disconnection

System Item Reference
Engine Control System Idle Air Volume Learning Work Procedure
Door & Lock Calibration Of Automatic Back Door Position Information Work Procedure
Power Window Control System Power Window System Initialization Work Procedure
Roof Moonroof Memory Reset/Initialization Sunshade Memory Reset/ Initialization Work Procedure
Automatic Drive Positioner Automatic Drive Positioner System Initialization Refer to Owner's Manual.
Heater & Air Conditioning Control System Temperature Setting Trimmer Temperature Setting Trimmer
Foot Position Setting Trimmer Foot Position Setting Trimmer
Inlet Port Memory Function (FRE) Inlet Port Memory Function (FRE)
Inlet Port Memory Function (REC) Inlet Port Memory Function (REC)
Setting of Target Evaporator Temp Upper Limit Target Evaporator Temp Upper Limit
Audio, Visual & Navigation System Audio (Radio Preset) Refer to Owner's Manual.
Navigation System Refer to Owner's Manual.
    Ecu Diagnosis Information. 12v Sub Battery (lithium Ion Battery)
    DTC Index Self Diagnostic Result DTC Display contents of CONSULT Reference P1A00-49 Lithium ion battery 12V DTC Description P1A01-A2 Lithium ion battery 12V DTC Description P1A0...
    Basic Inspection. Battery Inspection
    How to Handle Battery CAUTION: If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery. After connecting battery cabl...

    Other materials:

    Dtc/circuit Diagnosis. Door Lock/unlock Switch
    Front Lh Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Door lock and unlock switch (lock)”, “Door lock and unlock switch (unlock)” in “Data monitor” mode of "BCM [INT LAMP]". Check that the function operates normally according to the follow ...

    Brake Warning Lamp
    Component Function Check CHECK BRAKE WARNING LAMP FUNCTION (1) Check that brake warning lamp in combination meter turns ON for approximately 1 second after ignition switch is ON (before engine start). Is the inspection result normal? YES>> GO TO 2. NO>> Refer to Diagnosis Pr ...

    Dtc/circuit Diagnosis. Door Mirror Defogger Lh
    Component Function Check CHECK DOOR MIRROR DEFOGGER LH FUNCTION CONSULT Ignition switch ON. Select “Rear defogger” in “Active test” mode of "BCM". Touch “On”. Check that the driver side door mirror glass is getting warmer. NOTE: When glass is hot, never start ins ...