Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Diagnosis and Repair Work Flow

Nissan Rogue (T33) 2021-Present Service Manual / Steering :: Steering System / Basic Inspection :: Diagnosis and Repair Work Flow

Work Flow (Heated Steering Wheel)

DETAILED FLOW

OBTAIN INFORMATION ABOUT SYMPTOM

Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred) as much as possible when the customer brings the Nissan Ariya vehicle in.

>>

GO TO 2.

REPRODUCE THE MALFUNCTION INFORMATION

Check the malfunction on the Nissan Ariya vehicle that the customer describes.

Inspect the relation of the symptoms and the condition when the symptoms occur.

>>

GO TO 3.

IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”

Use “Symptom diagnosis” from the symptom inspection result in step 2 and then identify where to start performing the diagnosis based on possible causes and symptoms.

>>

GO TO 4.

IDENTIFY THE MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”

Perform the diagnosis with “Component diagnosis” of the applicable system.

>>

GO TO 5.

REPAIR OR REPLACE THE MALFUNCTIONING PARTS

Repair or replace the specified malfunctioning parts.

>>

GO TO 6.

FINAL CHECK

Check that malfunctions are not reproduced when obtaining the malfunction information from the customer, referring to the symptom inspection result in step 2.

Are the malfunctions corrected?

YES>>

INSPECTION END

NO>>

GO TO 2.

    System Description. System
    System Description (Heated Steering Wheel) SYSTEM DIAGRAMThe heated steering wheel switch controls the heated steering wheel relay. When the heated steering wheel switch is turn...
    Basic Inspection. Steering Wheel
    Inspection STEERING WHEEL AXIAL END PLAYCheck if movement exists when steering wheel is moved up and down, to the left and right and to the axial direction. Steering wheel axial...

    Other materials:

    B2e01-96 Tcu
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B2E01-96 Internal battery (Internal battery) Diagnosis condition When ignition switch is ON Signal (terminal) Internal battery Threshold Internal ba ...

    P0300 Misfire
    DTC Description DTC DETECTION LOGICWhen a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the crankshaft position (CKP) sensor signal to vary, ECM can determine that a misfire is occurring. Sensor Input signal to ECM ECM function Crankshaft pos ...

    Removal and Installation. Air Bag Diagnosis Sensor Unit
    Exploded View 1. Air bag diagnosis sensor unit — — — — : Nissan Ariya Vehicle front : Always replace after every disassembly. : N·m (kg-m, in-lb) Removal and Installation WARNING: Always observe the following items for preventing accidental acti ...