Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Configuration

Nissan Rogue (T33) 2021-Present Service Manual / Steering :: Steering Control System / Basic Inspection :: Configuration

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the power steering control module.

The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the Nissan Ariya vehicle specification to the power steering control module.

Refer to Work Procedure.

NOTE:

For details the network connection and operation, refer to “CONSULT Operation Manual”.

The configuration no need to “save” configuration data from the power steering control module. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.

CAUTION:

  • Complete the procedure of “Configuration” in order.

  • If incorrect “Configuration”, incidents might occur.

  • Never perform “Configuration” except for new power steering control module.

Work Procedure

WRITING VEHICLE SPECIFICATION

CONSULT

Perform writing Nissan Ariya vehicle specification to power steering control module following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.

NOTE:

  • Log in the network according to CONSULT guidance.

  • For details the network connection and operation, refer to “CONSULT Operation Manual”.

>>

Work End

    Basic Inspection. Additional Service When Replacing Power Steering Control Module Control Unit
    Work Procedure DESCRIPTIONWhen replacing the power steering control module, the procedures of BEFORE REPLACEMENT and AFTER REPLACEMENT must be performed. For work procedure, ref...
    Dtc/circuit Diagnosis. C1601-16 Battery Power Supply
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1601 16 BATTERY VOLT (Battery voltage) Diagnosis condition ...

    Other materials:

    C1f40-04 Ecm
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition   C1F40 04 ECM (Engine control module) Diagnosis condition When AEB system is ON Signal (terminal) — Threshold ...

    Informations de base
    AVERTISSEMENT Le non-respect des instructions et avertissements relatifs à l’utilisation correcte du système d’intervention de changement de voie intelligent du Nissan Rogue peut entraîner des blessures graves ou mortelles. Ce système n’assure pas la conduite autonome et ne peut év ...

    Freins
    Informations de base Si le système de freinage du Nissan Rogue ne fonctionne pas correctement, faites-le contrôler sans délai par un concessionnaire NISSAN. Freins à rattrapage automatique d'usure Le Nissan Rogue est équipé de freins à rattrapage automatique d’usure. Les freins à disq ...