Nissan Rogue Service Manual: Basic inspection

Symptom diagnosis

NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts. ×: Applicabl ...

Brake pedal

Inspection BRAKE PEDAL HEIGHT Check the brake pedal height (H) between the dash lower panel (3) and the brake pedal upper surface. CAUTION: Check the brake pedal height with the floor trim remov ...

Other materials:

Removal and installation
HORN Exploded View Horn (LOW) Horn (HIGH) Removal and Installation REMOVAL Horn (LOW)  Remove the front grille. Refer to EXT-23, "Removal and Installation".  Disconnect the harness connectors from the horn (LOW). NOTE: Before disconnecting the harn ...

ECU diagnosis information
BCM Reference Value NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read T ...

P0075 intake valve timing control
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0075 INT/V TIM V/CIR-B1 (Intake valve control solenoid circuit bank 1) ECM detects an abnormal voltage in the intake valve timing co ...