Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Basic information

WARNING

  • The heater and air conditioner function only when the engine is running.
  • Never leave children, dependent adults, or pets alone in the vehicle. Temperature inside a closed vehicle can rise rapidly and cause injury or death. They may also accidentally activate controls.
  • Avoid using recirculation mode for extended periods. This can cause stale air and window fogging.
  • Do not adjust climate controls while driving; full attention to vehicle operation is required.

The heating and cooling system operates when the engine is running, but the blower can continue working if the ignition switch is ON, even with the engine off.

NOTE:

  • Odors from inside or outside the vehicle can accumulate in the air conditioning unit and enter through the ventilators.
  • When parking the vehicle, set the system to allow fresh air intake instead of recirculation to help reduce interior odors.

When the Idling Stop System temporarily stops the engine, turning on the front defroster will restart the engine automatically. If the engine is running, turning on the defroster prevents the Idling Stop System from shutting it off.

If the engine is stopped by the Idling Stop System, heating and cooling performance may be reduced. For full system performance, restart the engine using the Idling Stop OFF switch.

    Heater and air conditioner
    Manual air conditioner and heater
    Basic information (fan speed control) dial Dial pointers A/C (air conditioner) button Air flow control buttons Temperature control dial (front defroster) button (rear window def...

    Other materials:

    B20de-72 Ign Relay Off Circ
    DTC Description IPDM E/R operates the ignition relay when it receives an ignition ON signal from BCM via CAN communication. Turn the ignition relay OFF by pressing the push-button ignition switch once when the Nissan Ariya vehicle speed is 2.5 MPH (4 km/h) or less. Turn the igniti ...

    2wd. Preparation. Preparation
    Preparation Special Service Tool Tool number (TechMate No.) Tool name Description KV40104000 ( – ) Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) Removing and Installing wheel hub lock nut. KV40107300 ( – ) Boot band crimping tool Installing bo ...

    P0111 Iat Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0111 00 IAT SENSOR 1 B1 (Intake air temperature sensor 1 circuit range/performance bank 1) A Diagnosis condition Ignition switch ON Signal (terminal) ...