Nissan Rogue (T33) 2021-Present Service Manual: B272c-12 Corner Sensor [fr]
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen items (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| B272C-12 |
CORNER SENSOR [FR] (Corner sensor [FR]) |
Diagnosis condition | When ignition switch is ON | |
| Signal (terminal) | Front sonar sensor signal RH outer | |||
| Threshold | Short circuit to power supply | |||
| Diagnosis delay time | 4 seconds or more | |||
POSSIBLE CAUSE
-
Harness and connector between sonar control unit and front sonar sensor RH outer
-
Front sonar sensor RH outer
FAIL-SAFE
Stop the obstacle detection function
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
-
Turn ignition switch ON.
-
Turn ignition switch OFF and wait at least 30 seconds.
-
Turn ignition switch ON and wait at least 30 seconds or more.
-
Select “Self Diagnostic Result” mode of “SONAR” using CONSULT.
-
Check the DTC.
Is DTC “B272C–12” detected?
YES>>Refer to Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
Diagnosis Procedure
CHECK FRONT SONAR SENSOR SIGNAL RH OUTER CIRCUIT (1)
-
Turn ignition switch OFF.
-
Disconnect sonar control unit connector and front sonar sensor RH outer connector.
-
Turn ignition switch ON.
-
Check voltage between sonar control unit harness connector and ground.
Sonar control unit (-) Voltage (Approx. ) Connector Terminal B20 4 Ground 0 V
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair harness or connector.
CHECK FRONT SONAR SENSOR SIGNAL RH OUTER CIRCUIT (2)
-
Turn ignition switch OFF.
-
Check continuity between front sonar sensor RH outer harness connector and ground.
| Front sonar sensor RH outer | Ground | Continuity | |
| Connector | Terminal | ||
| E307 | 2 | Not existed | |
Is the inspection result normal?
YES>>Replace the front sonar sensor RH outer. Refer to Removal and Installation.
NO>>Repair the harness or connector.
Other materials:
Dtc/circuit Diagnosis. Horn Function
Component Function Check
CHECK FUNCTION
CONSULT
Ignition switch OFF.
Perform “Horn” in “Active test” mode of “IPDM E/R”.
Check the horn operation.
Test item Description
Horn
On
Horn
Sounds (for 20 ms.)
Is the operation normal?
YES>>
Ins ...
B2e01-96 Tcu
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
B2E01-96
Internal battery
(Internal battery)
Diagnosis condition
When ignition switch is ON
Signal (terminal)
Internal battery
Threshold
Internal ba ...
Dtc/circuit Diagnosis. U0075-00 Communication Bus C Off
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
U0075-00
Control module comm Bus C Off
(Control module communication Bus C Off)
Diagnosis condition
Ignition switch ON
Signal (terminal)
CAN communication s ...
