Nissan Rogue (T33) 2021-Present Service Manual: B2227-86 Lost Communication (m-Can)
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen terms (Trouble diagnosis content) | DTC detected condition | ||
|---|---|---|---|---|
| B2227-86 |
Lost communication (M-CAN) [Lost communication (Multimedia-CAN)] |
MISSING MESSAGE | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | AV communication | |||
| Threshold | Abnormal communication is detected | |||
| Diagnosis delay time | 2 seconds or more | |||
POSSIBLE CAUSE
Harness or connectors
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
-
Ignition switch ON and wait for 2 seconds or more.
-
Select “Self diagnosis result” mode of “M&A”.
-
Check DTC.
Is DTC B2227-86 detected?
YES>>Refer to Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair:Inspection End.
Diagnosis Procedure
CHECK AV COMMUNICATION CIRCUIT
Check the AV communication circuit.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Repair or replace malfunctioning parts.
Other materials:
U1cab-02 Intake Door Motor
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
U1CAB-02
Intake door motor
(Intake door motor)
Diagnosis condition
Ignition switch ON
Signal (Terminal)
LIN (door motor) signal
Threshold
A/C amp. i ...
B24a1-16 A/c Auto Amp. Power Supply
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
B24A1-16
A/C AUTO AMP. POWER SUPPLY
(Air conditioning automatic amplifier power supply)
Diagnosis condition
Ignition switch ON
Signal (Terminal)
Accessory p ...
C106e-54 Steering Angle Sensor
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C106E
54
Steering angle sensor
(Steering angle sensor)
Diagnosis condition
When ignition switch is ON.
When the power supply voltage is normal.
...
