Nissan Rogue (T33) 2021-Present Service Manual: U2465-57 Mac Comm Error (sonar Control Unit)
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| U2465 | 57 |
CAN comm err (sonar control unit) [Controller area network communication error (sonar control unit)] |
Diagnosis condition | — |
| Signal (terminal) | — | |||
| Threshold | MAC communication error | |||
| Diagnosis delay time | — | |||
POSSIBLE CAUSE
-
MAC communication error
-
ADAS control unit 2used in other vehicles is installed in the Nissan Ariya vehicle
-
ADAS control unit 2
-
Sonar control unit
FAIL-SAFE
The following systems are canceled.
-
RAB
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “U2465-57” is displayed with DTC “U1327-52” or “U1327-54”, first perform the trouble diagnosis for DTC “U1327-52” or “U1327-54”.
Is DTC “U1327-52” or “U1327-54” detected?
YES>>Perform diagnosis of applicable. Refer to the following.
-
U1327-52: DTC Description
-
U1327-54: DTC Description
GO TO 2.
CHECK MAC DIAGNOSIS
With CONSULT
-
Ignition switch ON.
-
Perform “MAC Diagnosis” mode of “ICC/ADAS 2” using CONSULT.
Is DTC “U2465-57” detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
With Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| U2465 | 57 | CAN communication error sonar control unit | Diagnosis condition | — |
| Signal (terminal) | — | |||
| Threshold | MAC communication error | |||
| Diagnosis delay time | — | |||
POSSIBLE CAUSE
-
MAC communication error
-
ADAS control unit 2used in other vehicles is installed in the Nissan Ariya vehicle
-
ADAS control unit 2
-
Sonar control unit
FAIL-SAFE
The following systems are canceled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
-
FEB
-
RAB
-
PFCW
-
TSR
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “U2465-57” is displayed with DTC “U1327-52” or “U1327-54”, first perform the trouble diagnosis for DTC “U1327-52” or “U1327-54”.
Is DTC “U1327-52” or “U1327-54” detected?
YES>>Perform diagnosis of applicable. Refer to the following.
-
U1327-52: DTC Description
-
U1327-54: DTC Description
GO TO 2.
CHECK MAC DIAGNOSIS
With CONSULT
-
Ignition switch ON.
-
Perform “MAC Diagnosis” mode of “ICC/ADAS 2” using CONSULT.
Is DTC “U2465-57” detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1 >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2 >>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “U2465-57” is displayed with DTC “U1327-52” or “U1327-54”, first perform the trouble diagnosis for DTC “U1327-52” or “U1327-54”.
Is DTC “U1327-52” or “U1327-54” detected?
YES>>Perform diagnosis of applicable. Refer to the following.
-
U1327-52: DTC Description
-
U1327-54: DTC Description
GO TO 2.
CHECK MAC DIAGNOSIS
With CONSULT
Perform “MAC Diagnosis” mode of “ICC/ADAS 2” using CONSULT.
Is DTC “U2465-57” detected with DTC “U214F-57”, “U2175-57” (with around view monitor control unit), “U2176-57”, “U2440-57”, “U244F-57” and “U2476-57” at the same time?
YES (all DTC codes are detected at the same time)>>Replace the ADAS control unit 2. Refer to Removal and Installation.
NO (all DTC codes are not detected at the same time)>>GO TO 3.
CHECK CAN DIAGNOSIS
With CONSULT
Perform "CAN Diag".
Is the inspection result normal?
YES>>Contact Techline and report the Nissan Ariya vehicle condition.
NO>>Repair or replace root cause.
Other materials:
Parking brake
Basic information
WARNING
Never drive the vehicle with the parking brake applied. The brake will overheat and fail to operate and will lead to an accident.
Never release the parking brake from outside the vehicle. If the vehicle moves, it will be impossible to push the foot brake pedal and will l ...
C1213-A3 Control Unit Power Supply
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content) DTC detecting condition
C1213-A3
BATTERY VOLTAGE
(Battery voltage)
Diagnosis condition
Ignition switch: ON
Signal
Battery power supply signal (terminal #6)
Threshold
Battery po ...
System Description. Diagnosis System (occupant Detection System Control Unit)
CONSULT Function
APPLICATION ITEMCONSULT performs the following functions. Diagnosis mode CGW Status Description
Restricted Mode Diag Test Mode Open Mode
CGW Information
Display
Display
Display
Display the current CGW mode
Enables CGW to switch mode
Data mo ...
