Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Tilt/telescopic steering

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide / Pre-driving checks and adjustments / Tilt/telescopic steering

Basic information

WARNING

  • Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident.
  • Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driver's air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash.

    • You may also receive serious or fatal injuries from the air bag if you are up against it when it inflates. Always sit back against the seatback and as far away as practical from the steering wheel.

    Always use the seat belts.

Tilt and telescopic operation

Nissan Rogue. Tilt and telescopic operation

Pull the lock lever 1 down and adjust the steering wheel up, down, forward or rearward to the desired position. Push the lock lever up securely to lock the steering wheel in place. This allows Nissan Rogue drivers to customize steering comfort and visibility.

    Fuel-filler door
    Basic information CAUTION Avoid applying direct water pressure, such as high-pressured sprayer, on or around the fuel-filler door. Be sure to close the fuel-filler door before u...
    Sun visors
    1. To block glare from the front, swing down the main sun visor 1. 2. To block glare from the side, remove the main sun visor from the center mount and swing it to the side 2. 3...

    Other materials:

    Evap Canister Vent Control Valve
    Component Inspection CHECK EVAP CANISTER VENT CONTROL VALVE-1 Disconnect hose from (A), (B), and (C) with remaining harness connector connected. Block port (B). Blow air into port (A) and check that it flows freely out of port (C). Is sufficient air flowed from port (C)? YES& ...

    Preparation
    Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description KV10115801 (NI-38956) Oil filter wrench Removing and installing oil filter a: 64.3 mm (2.531 in) KV311039S0 ( — ) Chargin ...

    Dtc/circuit Diagnosis. B242a-98 Closure Motor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B242A-98 Closure motor (Closure motor) Diagnosis condition When back door closure function operate Signal (terminal) — Threshold When thermal prot ...