Nissan Rogue (T33) 2021-Present Service Manual: Removal and Installation :: Seat Memory Switch

Nissan Rogue (T33) 2021-Present Service Manual / Body Interior :: Automatic Drive Positioner / Removal and Installation :: Seat Memory Switch

Removal and Installation

REMOVAL

Remove front door finisher LH. Refer to Removal and Installation.

Disengage the fixing pawls using a remover tool (A) and then remove seat memory switch .

: Pawl

INSTALLATION

Install in the reverse order of removal.

    Removal and Installation. Driver Seat Control Unit
    Removal and Installation REMOVALRemove driver seat. Refer to Removal and Installation. Disconnect driver seat control unit connector. Remove fixing screws , and then remove driv...
    Body Exterior, Doors, Roof & Vehicle Security. Door & Lock

    Other materials:

    Throttle Valve Closed Position Learning
    Description Throttle Valve Closed Position Learning is a function of ECM to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time the harness connector of the electric throttle control actuator or ECM i ...

    Aide changmt. voie
    Informations de base L’aide changement de voie est une fonctionnalité avancée intégrée au système ProPILOT Assist 2.1 du Nissan Rogue. Avant d’utiliser cette fonction d’assistance à la conduite, il est fortement recommandé de lire attentivement l’intégralité du chapitre consacré ...

    P0300 Misfire
    DTC Description DTC DETECTION LOGICWhen a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the crankshaft position (CKP) sensor signal to vary, ECM can determine that a misfire is occurring. Sensor Input signal to ECM ECM function Crankshaft pos ...