Nissan Rogue (T33) 2021-Present Service Manual: Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
(NI-39570) Chassis ear |
|
Locates the noise |
|
(NI-50397) Squeak and Rattle Kit |
|
Repairs the cause of noise |
Commercial Service Tool
| Tool name | Description | |
|---|---|---|
| Engine ear |
|
Locates the noise |
| Power tool |
|
Loosening bolts, nuts and screws |
Other materials:
Intake Camshaft Position Sensor
Component Inspection
CHECK INTAKE CAMSHAFT POSITION SENSOR -1
Turn ignition switch OFF.
Loosen the fixing bolt of the sensor.
Disconnect intake camshaft position sensor harness connector.
Remove the sensor.
Visually check the sensor for chipping.
Is the inspection re ...
Symptom Diagnosis. Normal Operating Condition
Description
When the back door position is in the range of [between "just before fully closed" and the position approximately less than 150 mm (5.91 in) from "just before fully closed" ], the back door does not operate even if any of switches are operated.
To operate the back door by swi ...
Precaution. Precautions
PRECAUTIONS FOR SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG AND SEAT BELT PRE-TENSIONER
: Precautions
The Supplemental Restraint System such as “AIR BAG� and “SEAT BELT
PRE-TENSIONER�, used along with a front seat belt, helps to reduce the
risk or severity of injury t ...




