Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Electrical & power control / Body Control System / Without intelligent key system / Preparation

Special Service Tool

The actual shape of the tools may differ from those tools illustrated here.

Tool number (TechMate No.) Tool nam		Description
— (J-50190) Signal Tech II		Activate and display TPMS transmitter IDs Display tire pressure reported by the TPMS transmitter Read TPMS DTCs Register TPMS transmitter IDs Check Intelligent Key relative signal strength Confirm vehicle Intelligent Key antenna signal strength Compatible with future sensors Equipped with a display

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description

COMPONENT PARTS BODY CONTROL SYSTEM BODY CONTROL SYSTEM : Component Parts Location BCM Behind instrument panel (LH) POWER CONSUMPTION CONTROL SYSTEM POWER CONSUMPTION CONTROL SYSTEM : ...

Other materials:

P0848 transmission fluid pressure SEN/SW B
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0848 FLUID PRESS SEN/SW B (Transmission Fluid Pressure Sensor/Switch B Circuit Low) When all of the following conditions are satisfied and this sta ...

P050A, P050B, P050E cold start control
Description ECM controls ignition timing and engine idle speed when engine is started with pre-warming up condition. This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions. DTC Description DTC DETECTION LOGIC DTC No. CONSULT scre ...

Moonroof switch
Removal and Installation REMOVAL Remove map lamp assembly. Refer to INL-55, "Removal and Installation". Using a suitable tool release clip from harness connector. : Clip Using a suitable tool release pawls and remove moonroof switch finisher (1). Using a ...