Nissan Rogue (T33) 2021-Present Service Manual: P161e Immobilizer

DTC Description

DTC DETECTION LOGIC

NOTE:

DTC P161E is displayed with another ECU.

Perform the trouble diagnosis for the corresponding DTC of another ECU. Refer to DTC Description.

POSSIBLE CAUSE

FAIL-SAFE

Not applicable

    P161d Immobilizer
    DTC Description DTC DETECTION LOGICNOTE: DTC P161D is displayed with another ECU. Perform the trouble diagnosis for the corresponding DTC of another ECU. Refer to DTC Descriptio...
    P161f Immobilizer
    DTC Description DTC DETECTION LOGICNOTE: DTC P161F is displayed with another ECU. Perform the trouble diagnosis for the corresponding DTC of another ECU. Refer to DTC Descriptio...

    Other materials:

    P0300 Misfire
    DTC Description DTC DETECTION LOGICWhen a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the crankshaft position (CKP) sensor signal to vary, ECM can determine that a misfire is occurring. Sensor Input signal to ECM ECM function Crankshaft pos ...

    C1220-54 Incomplete Air Bleeding
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detecting condition C1220-54 INCOMP AIR BLEEDING (Incomplete air bleeding) Diagnosis condition Ignition switch: ON Signal — Threshold Air bleeding of electro-hydraulic co ...

    Calibrating Camera Image (intelligent Around View Monitor)
    Without Propilot Assist 2.1 Work Procedure Calibration must be performed after removing/replacing the cameras, removing parts (e.g. front grille, door mirror, and others) mounted on the cameras, or replacing the around view monitor control unit. The use of CONSULT is required to per ...