Nissan Rogue (T33) 2021-Present Service Manual: Manual Air Conditioning :: Preparation. Preparation

Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number

(TechMate No.)

Tool name
  Description

 —

(NI-46534)

Trim Tool Set

Removing trim components

Commercial Service Tools

Tool name Description
Power tool

Loosening nuts, screws and bolts

HFO-1234yf (R-1234yf) Service Tool and Equipment

Do not mix HFO-1234yf (R-1234yf) refrigerant and/or its specified oil with CFC-12 (R-12) refrigerant and/or its oil.

Separate and non-interchangeable service equipment must be used for handling each type of refrigerant/oil.

Refrigerant container fittings, service hose fittings and service equipment fittings (equipment which handles refrigerant and/or oil) are different between CFC-12 (R-12) and HFO-1234yf (R-1234yf). This is to avoid mixed use of the refrigerants/oil.

Adapters that convert one size fitting to another must not be used. Refrigerant/oil contamination will occur and compressor failure will result.

Tool number

(TechMate No.)

Tool name
Description

(NI-43926)

Refrigerant dye leak detection kit

Kit includes:

Power supply:

  • DC 12V (battery terminal)

(NI-52990)

Fluorescent Oil Dye
    Manual Air Conditioning. Precaution. Precautions
    Precautions Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG� and “SEAT BELT P...
    Manual Air Conditioning. System Description

    Other materials:

    Wiper and washer switch
    Basic information WARNING In freezing temperatures, the washer solution may freeze on the windshield and limit visibility, increasing the risk of an accident. Warm the windshield with the defroster before using the washer. CAUTION Do not operate the washer continuously for more than 30 seconds. ...

    With Idle Start/stop. Symptom Diagnosis. Charging System
    Charging System Symptom Table Symptom Reference Discharged 12V battery Refer to Work Flow (With EXP-800 NI or GR8-1200 NI) or Work Flow (Without EXP-800 NI or GR8-1200 NI). The charge warning lamp does not illuminate when the ignition switch is set to ON. The charge warning lamp ...

    Dtc/circuit Diagnosis. Power Window Relay
    Component Inspection CHECK POWER WINDOW RELAY Ignition switch OFF. Remove power window relay. Check continuity between power window relay terminals. Power window relay Condition Continuity Terminals 12 V direct current supply between terminals and . Yes No cu ...