Nissan Rogue (T33) 2021-Present Service Manual: Ecu Diagnosis Information :: Moonroof Motor Assembly

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Roof / Ecu Diagnosis Information :: Moonroof Motor Assembly

Reference Value

TERMINAL LAYOUT

PHYSICAL VALUES

Terminal No.

(Wire color) 		Description Condition

Value

(Approx.)
+ – Signal name Input/Output

1

(B) 		Ground Ground — — 0 V

4

(W) 		Ground Moonroof Tilt UP signal Input Moonroof switch

Operate

(PUSH) 		0 V
Other than above Battery voltage

5

(L) 		Ground Moonroof OPEN signal Input Moonroof switch

Operate

(OPEN) 		0 V
Other than above Battery voltage

6

(R) 		Ground Auto ACC power supply Input Ignition switch OFF (auto ACC status) or ON Battery voltage

7

(GR) 		Ground Communication line Input/Output Ignition switch ON

9

(P) 		Ground LIN communication signal Input/Output Ignition switch ON

10

(V) 		Ground Moonroof CLOSE signal Input Moonroof switch Operate (CLOSE) 0 V
Other than above Battery voltage
    Ecu Diagnosis Information. Bcm
    List of ECU Reference ECU Reference BCM Reference Value (With Type A Meter) Reference Value (With Type B Meter) Fail-safe DTC Inspection Priority Chart DTC Index
    Basic Inspection. Diagnosis and Repair Work Flow
    Work Flow OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incid...

    Other materials:

    U0469 Can Communication
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0469 00 Invalid data (starter/generator C/U) (Invalid Data Received From Starter / Generator Control Module) Diagnosis condition Ignition switch ON Signa ...

    Rear-facing child restraint installation using the seat belts
    WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. If the ALR mode is not used, the restraint may not be properly secured and could tip or become loose, causing injury to a child in a sudden stop or collision. For additional ...

    P052a Intake Valve Timing Control
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P052A 00 CAMSHAFT POSITION TIMING B1 (Cold start “A” camshaft position timing over-advanced bank 1) Diagnosis condition Cold condition Signal (terminal) ...