Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: C1733-68 Tire Pressure Sensor Rr
DTC Description
NOTE:
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||||
|---|---|---|---|---|---|---|
| C1733-68 |
Tire pressure sensor RR (Tire pressure sensor rear right) |
1 | Diagnosis condition |
Drive the Nissan Ariya vehicle at 25 MPH (40 km/h) or more.
When DTC is memorized, DTC is displayed again at ignition switch ON. |
||
| Signal (terminal) | Temperature data signal. | |||||
| Threshold | Malfunction in the tire pressure data from the rear right tire pressure sensor. | |||||
| Diagnosis delay time | 1 second or less. | |||||
| 2 | Diagnosis condition |
Drive the Nissan Ariya vehicle at 25 MPH (40 km/h) or more.
When DTC is memorized, DTC is displayed again at ignition switch ON. |
||||
| Signal (terminal) | Temperature data signal. | |||||
| Threshold | Malfunction in the tire temperature data from the rear right tire pressure sensor. | |||||
| Diagnosis delay time | 1 second or less. | |||||
| 3 | Diagnosis condition |
Drive the Nissan Ariya vehicle at 25 MPH (40 km/h) or more.
When DTC is memorized, DTC is displayed again at ignition switch ON. |
||||
| Signal (terminal) | Temperature data signal. | |||||
| Threshold | Malfunction in the G sensor data from rear right tire pressure sensor. | |||||
| Diagnosis delay time | 1 second or less. | |||||
POSSIBLE CAUSE
Rear right tire pressure sensor
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
PERFORM SELF DIAGNOSIS RESULT
CONSULT
Perform “Self diagnosis result” mode of “BCM”.
Is DTC “C1733-68” detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: Inspection End.
DTC Diagnosis Procedure
NOTE:
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
PERFORM SELF DIAGNOSIS RESULT
Replace rear right tire pressure sensor even if other DTCs are displayed along with “C1733-68” in “Self diagnosis result” mode of “BCM”.
>>
Replace rear right tire pressure sensor. Refer to Removal & Installation.
Other materials:
Steering Switch Signal B Circuit
Component Function Check
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
Ignition switch ON.
Select “Steering switch input” in “Data monitor” mode of “M&A”.
Check that the function operates normally according to the following conditions:
Condition Value
CONTRO ...
Dtc/circuit Diagnosis. B2428-46 Automatic Back Door Control Unit
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
B2428-46
Automatic back door control unit
(Automatic back door control unit)
Diagnosis condition
All times
Signal (terminal)
—
Threshold
Automatic ...
Engine Stand Setting
Setting
NOTE:
Explained here is how to disassemble with engine stand
supporting transaxle surface. When using different type of engine stand,
note with difference in steps and etc.
Remove the engine and the transaxle assembly from the
vehicle, and separate the transaxle from the engine. Ref ...
