Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2921-A3 Driver Seat Control Unit
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC detection condition | |
|---|---|---|---|
| B2921-A3 |
Driver seat control unit (Driver seat control unit) |
Diagnosis condition | The power consumption control of driver seat control unit is in wake-up state |
| Signal (terminal) | Battery power supply (terminal #48) | ||
| Threshold | 18 V or more | ||
| Diagnosis delay time | 1 second or more | ||
POSSIBLE CAUSE
Charging system
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
-
Ignition switch ON.
-
Select “Self diagnosis result” mode of “DRIVER SEAT”.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
DTC Diagnosis Procedure
CHECK CHARGING SYSTEM
Perform trouble diagnosis for charging system. Refer to Work Flow (With EXP-800 NI or GR8-1200 NI) or Work Flow (Without EXP-800 NI or GR8-1200 NI).
>>
Inspection End.
Other materials:
U007a-00 Control Module Comm Bus H Off
DTC Description
DESCRIPTIONCAN (Controller Area Network) is a serial
communication line for real time applications. It is an on-Nissan Ariya
vehicle multiplex communication line with high data communication speed
and excellent error detection ability. Modern Nissan Ariya vehicle is
equipped ...
Kr15ddt. Preparation. Preparation
Preparation
Commercial Service Tools
HFO-1234yf (R-1234yf) Service Tool and Equipment
Never mix HFO-1234yf (R-1234yf) refrigerant and/or its specified
lubricant with CFC-12 (R-12) or HFC-134a (R- 134a) refrigerant and/or
its lubricant.
Separate and non-interchangeable service equipment ...
Symptom Diagnosis. Ign Off Interlock Door Unlock Function Does Not Operate
Diagnosis Procedure
CHECK “AUTO DOOR UNLOCK” SETTING IN COMBINATION METER
Check “Auto Door Unlock” setting is “IGN OFF”.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Set “IGN OFF” in combination meter.
REPLACE BCM
Replace BCM. Refer to Removal and I ...
