Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2047-87 Electric Shift Communication
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC detecting condition | |
|---|---|---|---|
| B2047–87 |
Electric shift communication fail (Electric shift communication fail) |
Diagnosis condition | When the ignition switch is turned from OFF to ON |
| Signal (terminal) | CAN communication signal | ||
| Threshold | When Intelligent Key unit cannot detect CAN communication with electric shift control module | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
-
Harness or connector
(The CAN communication line is open or shorted)
-
Electric shift control module
FAIL-SAFE
Prohibit shifting the shift selector from P position
CONFIRMATION PROCEDURE
DTC CONFIRMATION
CONSULT
-
Ignition switch ON.
-
Select “Self diagnosis result” mode of “INTELLIGENT KEY”.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: Inspection End.
DTC Diagnosis Procedure
CHECK DTC PRIORITY OF INTELLIGENT KEY UNIT
CONSULT
-
Select “Self diagnosis result” mode of “INTELLIGENT KEY”.
-
If DTC B2042–4A is displayed with two or more DTCs are detected, refer to DTC inspection priority chart, and determine trouble diagnosis.
Is applicable DTC detected?
YES>>Perform the trouble diagnosis related to the detected DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK DTC PRIORITY OF ELECTRIC SHIFT CONTROL MODULE
CONSULT
Select “Self diagnosis result” mode of “SHIFT”.
Is the DTC detected?
YES>>Perform the trouble diagnosis related to the detected DTC. Refer to DTC Index.
NO>>Replace electric shift control module. Refer to Removal and Installation.
Other materials:
Removal and Installation. Tire Pressure Sensor
Exploded View
Screw
Tire pressure sensor
Valve
Valve core
Valve cap
: Comply with the assembly procedure when tightening. Refer to Removal and Installation.
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
Removal & Install ...
System Description. Diagnosis System (occupant Detection System Control Unit)
CONSULT Function
APPLICATION ITEMCONSULT performs the following functions. Diagnosis mode CGW Status Description
Restricted Mode Diag Test Mode Open Mode
CGW Information
Display
Display
Display
Display the current CGW mode
Enables CGW to switch mode
Data mo ...
U2454-87 Can Comm Circuit
Without Propilot Assist 2.1
DTC Description
CAN COMMUNICATIONCAN (Controller Area Network) is a
serial communication line for real time applications. It is an on-Nissan
Ariya vehicle multiplex communication line with high data communication
speed and excellent error detection ability. Mode ...
