Nissan Rogue (T33) 2021-Present Service Manual: Diagnosis System (side Radar Rear Lh)
CONSULT Function [Side radar (Rear left)]
DESCRIPTION
CONSULT performs the following functions via CAN communication using side radar rear LH.
| Diagnosis mode | Description |
|---|---|
| Self Diagnostic Result | Retrieve DTC from ECU and display diagnostic items |
| Data Monitor | Monitor the input/output signal of the control unit in real time |
| Work Support | This mode enables a technician to adjust some devices faster and more accurately |
| ECU Identification | Display the ECU identification number (part number etc.) of the selected system |
| Replace ECU | The Nissan Ariya vehicle specification can be written when the control unit is replaced |
SELF DIAGNOSTIC RESULT
Self Diagnostic Result
Displays memorized DTC in side radar rear LH. Refer to DTC Index.
FFD (Freeze Frame Data)
The side radar records the following data when the malfunction is detected.
|
CONSULT screen item (Indication/Unit) | Description |
|---|---|
|
ODO/TRIP METER (Km) |
Nissan Ariya Vehicle speed of the moment a particular DTC is detected |
|
DTC count (count) |
Indicates the detection count of the corresponding DTC |
DATA MONITOR
|
Monitored item [Unit] | Description |
|---|---|
|
BSW select [Off/On] |
Indicates an [On/Off] state of the BSW system |
|
RCTA select [Off/On] |
Indicates an [On/Off] state of the RCTA system |
|
Horizontal alignment value [deg] |
Indicates the alignment value (Horizontal value) |
|
Vertical alignment value [deg] |
The item is displayed, but it is not used |
WORK SUPPORT
| Work support items | Description |
|---|---|
| Side radar alignment | Outputs side radar, calculates dislocation of the side radar, and displays adjustment direction |
ECU IDENTIFICATION
Displays side radar rear LH parts number.
REPLACE ECU
Vehicle specification can be written, when side radar rear LH is replaced.
Other materials:
Huile moteur
Vérification du niveau d'huile moteur
1. Garez le Nissan Rogue sur une surface plane et serrez fermement le frein de stationnement.
2. Laissez le moteur fonctionner jusqu’à ce qu’il atteigne sa température normale de fonctionnement.
3. Arrêtez le moteur et patientez au minimum 10 mi ...
Electro-Hydraulic Coupling
Exploded View
Companion flange lock nut
Companion flange
Electro-hydraulic coupling oil seal
Electro-hydraulic coupling assembly
O-ring
Actuator assembly
O-ring
Drive pinion oil seal
Drive pinion lock nut
Pinion front bearing
Gasket
Dr ...
Dtc/circuit Diagnosis. Starter Cut Relay
Component Inspection
CHECK STARTER CUT RELAY
Ignition switch OFF.
Disconnect starter cut relay.
Check continuity between starter cut relay terminals.
Starter cut relay Condition Continuity
Terminal
6
7
12 V direct current supply between terminals 8 and 9
Yes
N ...

NOTE: