Nissan Rogue (T33) 2021-Present Service Manual: Diagnosis System (a/c Switch Assembly)

Diagnosis Description

DESCRIPTION

On board diagnosis of A/C switch assembly can be used to perform an operation check of the indicator lamps.

STARTING PROCEDURE

Starting Self-diagnosis Mode

The self-diagnosis function starts when the A/C switch is pressed for 5 seconds or more within 10 seconds after the ignition switch places ON.

Ending Self-diagnosis Mode

Ignition switch OFF or press DEF switch.

DIAGNOSIS DESCRIPTION

Check indicators of all A/C switch assembly switches.

When normal: All Indicator lamps on A/C switch assembly turn ON.

Malfunction: The malfunctioning part does not turn ON. (A/C switch assembly malfunction)

NOTE:

If on board diagnosis does not start, check A/C switch assembly power supply and the ground circuit. Refer to Diagnosis Procedure. If the result of the check is normal, replace A/C switch assembly. Refer to Removal and Installation.

    Diagnosis System (hvac)
    CONSULT Function CONSULT performs the following functions via CAN communication with A/C amp. Diagnosis mode Function Self diagnosis result Display non-network DTC which A/C amp...
    Diagnosis System (bcm)
    Air Conditioner CONSULT Function (BCM) Active test Test item Operation Description PTC relay-1 OFF/ON PTC heater relay 1 is turned OFF/ON. PTC relay-2 OFF/ON PTC heater relay 2 ...

    Other materials:

    Turning the AEB with Pedestrian Detection system ON/OFF
    AEB system OFF warning light (on the meter panel) Vehicle information display Steering-wheel-mounted controls (left side) Follow the steps below to switch the AEB with Pedestrian Detection system on or off in your Nissan Rogue. 1. Press the button until “Settings” appears in the vehicle ...

    Removal and Installation. Front Fender
    Exploded View Fender cover Front fender ledge cover Front fender bracket Front fender assembly Front fender baffle     : Pawl : N·m (kg-m, in-lb) Front Fender Removal and Installation REMOVALRemove front fender protector. Refer to Removal an ...

    Removal and Installation. Battery Terminal with Fusible Link
    Exploded View Battery terminal with fusible link : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) Removal and Installation REMOVALDisconnect the battery cable from the negative terminal. Refer to Exploded View. CAUTION: To prevent damage to the parts, disc ...