Nissan Rogue (T33) 2021-Present Service Manual: Cvt: Ge0f14a :: Service Data and Specifications (sds). Service Data and Specifications (sds)

Nissan Rogue (T33) 2021-Present Service Manual / Transmission & Driveline :: Transaxle & Transmission / Cvt: Ge0f14a :: Service Data and Specifications (sds). Service Data and Specifications (sds)

Service Data and Specifications (sds)

General Specification

Engine model KR15DDT
Drive type FWD AWD
Transaxle model GE0F14A
Transaxle gear ratio D position 2.953 - 0.361
R position 2.215
Final drive 5.676
Recommended fluid Refer to Fluids and Lubricants.
Fluid capacity liter

Shift Characteristics

Unit: rpm

Throttle position Shift pattern CVT input speed
At 40 km/h (25 MPH) At 60 km/h (37 MPH)
2/8 “D” position (Normal) 1,940-2,340 2,040-2,440
8/8 “D” position (Normal) 3,150-3,650 3,380-4,730

NOTE:

Lock-up is engaged at the vehicle speed of approximately 15 km/h (9 MPH) to 60 km/h (37 MPH).

Stall Speed

Unit: rpm

Stall speed 2415 ‐ 2825

Torque Converter

Unit: mm (in)

Distance between the converter housing and torque converter 14 (0.551)

Water Control Valve

Standard
Valve opening temperature 69 – 73°C (156 –163°F)
Maximum valve lift 5.0 mm/85°C (0.197 in/185°F)
Valve closing temperature 65°C (149°F)
    Transaxle Assembly
    Exploded View O-ring Tube A Control valve O-ring Oil strainer Oil pan gasket Oil pan Drain plug gasket Drain plug Magnet O-ring O-ring Tube B Lip seal Transaxle assembly : Alway...
    Transmission & Driveline. Driveline

    Other materials:

    Handling Precaution
    Precautions for Automatic Emergency Braking DISTANCE SENSOR HANDLINGRefer to Precautions for Intelligent Forward Collision Warning.FRONT CAMERA UNIT HANDLINGRefer to Precautions for Lane Departure Warning.PRECAUTIONS FOR AEBFailure to follow the warnings and instructions for proper use of the AEB ...

    Diagnostic Can Communication Circuit
    Diagnosis Procedure CONNECTOR INSPECTION Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side). Data link connector 8CH CAN gat ...

    Dtc/circuit Diagnosis. B2426-25 Spindle Sensor Lh
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B2426-25 Spindle sensor LH (Spindle sensor left hand) Diagnosis condition When automatic back door open/close function operate Signal (terminal) Encoder LH ...