Nissan Rogue (T33) 2021-Present Service Manual: Common Item

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / System Description :: Diagnosis System (bcm) / Common Item

CONSULT Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.

Diagnosis mode Function Description
Self diagnosis result Displays the diagnosis results judged by BCM.
Data monitor Displays the real-time input/output data from BCM input/output data.
Work supports The settings for BCM functions can be changed.
Active test BCM can provide a drive signal to electronic components to check their operation.
ECU identification Allows confirmation of BCM part number.
Replace ECU Writes the Nissan Ariya vehicle specification when replacing the BCM

SELF DIAGNOSIS RESULT

Refer to DTC Index.

ECU IDENTIFICATION

The BCM part number is displayed.

ACTIVE TEST

Test Item Operation Description
Flasher LH

  • Outputs voltage to blink the turn signal lamp LH.

  • Transmits the turn indicator signal to the combination meter via CAN communication to blink the turn signal indicator LH and output the turn signal operating sound to the meter speaker.
RH

  • Outputs voltage to blink the turn signal lamp RH.

  • Transmits the turn indicator signal to the combination meter via CAN communication to blink the turn signal indicator RH and output the turn signal operating sound to the meter speaker.
LH/RH

  • Outputs voltage to blink the turn signal lamp LH and turn signal lamp RH.

  • Transmits the turn indicator signal to the combination meter via CAN communication to blink the turn signal indicator LH/RH and output the turn signal operating sound to the meter speaker.
Trunk/luggage lamp ON Outputs the luggage room lamp control signal to turn the luggage room lamp ON.
OFF Stops the luggage room lamp control signal to turn the luggage room lamp OFF.
Trunk/back door ON This test is able to back door lock assembly operation. The actuator opens when “ON” on CONSULT screen is touched.
Front window defogger (driver side) ON

NOTE:

This item is displayed, but cannot be used.
OFF
Front window defogger (passenger side) ON

NOTE:

This item is displayed, but cannot be used.
OFF
Interior lamp ON Outputs the interior room lamp relay control signal.
OFF Stops the interior room lamp relay control signal.
Stop start OFF switch indicator ON

NOTE:

This item is displayed, but cannot be used.
PTC relay-1 ON PTC heater relay-1 is turned ON.
OFF PTC heater relay-1 is turned OFF.
PTC relay-2 ON PTC heater relay-2 is turned ON.
OFF PTC heater relay-2 is turned OFF.
PTC relay-3 ON PTC heater relay-3 is turned ON.
OFF PTC heater relay-3 is turned OFF.
Super lock Lock

NOTE:

This item is displayed, but cannot be used.
Door lock status indicator ON

NOTE:

This item is displayed, but cannot be used.
Auto retractable door mirror ON

NOTE:

This item is displayed, but cannot be used.
OFF
Front wiper Low Operates front wiper LO.
Rear wiper ON Operates the rear wiper.
OFF Stops the rear wiper.
Front lamp ON Outputs the interior room lamp control signal to turn the interior room lamp ON.
OFF Stops the interior room lamp control signal to turn the interior room lamp OFF.
Stop lamp 1 ON Outputs voltage to turn the stop lamp RH ON.
OFF Stops voltage to turn the stop lamp RH OFF.
Stop lamp 2 ON Outputs voltage to turn the stop lamp LH and high-mounted stop lamp ON.
OFF Stops voltage to turn the stop lamp LH and high-mounted stop lamp OFF.
Rear fog lamp ON Outputs voltage to turn the rear fog lamp ON.
OFF Stops voltage to turn the rear fog lamp OFF.
Rear defogger ON Rear window defogger operates when “ON” on CONSULT screen is touched.
OFF Rear window defogger turns OFF when “OFF” on CONSULT screen is touched.

WORK SUPPORTS

Item Setting item Description
VIN registration START Register of the Nissan Ariya vehicle identification number when replacing the BCM.
MAC KEY writing — Write MAC key to the BCM.
ID registration START Refer to Description.
Signature light setting START

NOTE:

This item is displayed, but cannot be used.
MODE1
MODE2
Change set

*: Factory setting

REPLACE ECU

Refer to Description.

FREEZE FRAME DATA (FFD)

The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on CONSULT:

CONSULT screen item Indication/Unit Description
BATTERY VOLTAGE V Battery voltage of the moment a particular DTC is detected.
Nissan Ariya Vehicle SPEED mph/km/h Vehicle speed of the moment a particular DTC is detected.
EXTERNAL TEMP °F/°C External temperature the moment a particular DTC is detected
Nissan Ariya Vehicle COND —

NOTE:

This item is displayed, but cannot be used.
DOOR LOCK STATUS —

NOTE:

This item is displayed, but cannot be used.
POWER SUPPLY COUNTER min Displays the cumulative time from the time that the battery terminal is connected.
    System Description. Diagnosis System (bcm)
    Air Pressure Monitor
    CONSULT Function [BCM - AIR PRESSURE MONITOR] DATA MONITORNOTE: The following table includes information [items] inapplicable to this Nissan Ariya vehicle. For information [item...

    Other materials:

    Anc (active Noise Control Unit)
    B1a01-11 Front Door Speaker Lh DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B1A01-11 FL-DOOR woofer OUT (Front left door woofer) Diagnosis condition When ignition switch is ON Signal (terminal) Soun ...

    Symptom Diagnosis. Automatic Back Door Functions Do Not Cancel
    Diagnosis Procedure CHECK “POWER BACK DOOR SETTING” IN COMBINATION METER Check “Power back door setting” is in the OFF. Is the inspection result normal? YES>> GO TO 2. NO>> Set “Power back door setting” to “OFF”. REPLACE AUTOMATIC BACK DOOR CONTROL UNIT Rep ...

    Removal and Installation. Side Guard Molding
    Exploded View Front door panel Front side guard molding Rear side guard molding Rear door panel Double-sided tape [t: 1.2 mm (0.047 in)]     : Clip : Nissan Ariya Vehicle front : Always replace after every disassembly. Front Side Guar ...