Nissan Rogue (T33) 2021-Present Service Manual: C1f8a-83 Side Radar Rh
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F8A | 83 |
Side radar rear RH (Side radar rear right hand) |
Diagnosis condition | When engine is running |
| Signal (terminal) | CAN communication signal | |||
| Threshold | ADAS control unit 2 detects an error signal that is received from side radar RH via CAN communication | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
Side radar RH
FAIL- SAFE
The following systems are canceled.
-
BSW
-
I-BSI
-
RCTA
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F8A-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F8A-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F8A-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
With Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F8A | 83 |
Side radar rear RH (Side radar rear right hand) |
Diagnosis condition | When engine is running |
| Signal (terminal) | CAN communication signal | |||
| Threshold | ADAS control unit 2 detects an error signal that is received from side radar rear RH via CAN communication | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Side radar rear RH
-
ADAS control unit 2
FAIL- SAFE
The following systems are canceled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
-
Blind Spot Intervention
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F8A-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F8A-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F8A-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F8A-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
CHECK SIDE RADAR RH SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “Side radar (Rear right)”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
Dtc/circuit Diagnosis. B0028-1a Side A/b Module Rh
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
B0028-1A
SIDE A/B MODULE RH
(Right Side Airbag Deployment Control)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
Front side air bag modu ...
Dtc/circuit Diagnosis. C18d6-09 Brake Power Supply Back up Unit
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition
C18D6
09
Backup power supply unit
1
Diagnosis condition
When Ignition switch is ON.
Signal (terminal)
Brake power supply backup unit signal
Threshold
When a malfunction is de ...
Dtc/circuit Diagnosis. P161d-00 Immobilizer
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC detecting condition
P161D-00
IMMOBILIZER
(Immobilizer)
Diagnosis condition
Ignition switch ON
Signal (terminal)
—
Threshold
When Intelligent Key unit detects an immob ...
