Nissan Rogue (T33) 2021-Present Service Manual: C1f64-08 Head up Display Unit
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F64 | 08 |
Head Up Display unit (Head Up Display unit) |
Diagnosis condition |
|
| Signal (terminal) | CAN communication signal | |||
| Threshold | Signal receiving from Head Up Display unit via CAN communication is malfunction | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Head Up Display unit
-
ADAS control unit 2
FAIL-SAFE
The following system are cancelled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F64-08” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Turn the MAIN switch of ProPILOT Assist 2.1 system ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the DTC “C1F64-08” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F64-08” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F64-08” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM SELF-DIAGNOSIS OF HEAD UP DISPLAY UNIT
Check if any DTC is detected in “Self Diagnostic Result” of “E-HUD”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
C1213-A3 Control Unit Power Supply
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content) DTC detecting condition
C1213-A3
BATTERY VOLTAGE
(Battery voltage)
Diagnosis condition
Ignition switch: ON
Signal
Battery power supply signal (terminal #6)
Threshold
Battery po ...
Removal and Installation. Tire Pressure Sensor
Exploded View
Screw
Tire pressure sensor
Valve
Valve core
Valve cap
: Comply with the assembly procedure when tightening. Refer to Removal and Installation.
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
Removal & Install ...
C106f-54 Steering Angle Sensor
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C106F
54
Steering angle sensor
(Steering angle sensor)
Diagnosis condition
When ignition switch is ON.
When the power supply voltage is normal.
...
