Nissan Rogue (T33) 2021-Present Service Manual: C1f43-82 Around View Monitor Control Unit
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F43 | 82 |
Around view control unit (Around view control unit) |
Diagnosis condition | When AEB system is ON |
| Signal (terminal) | — | |||
| Threshold | If around view monitor control unit is malfunctioning | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Around view monitor control unit
-
ADAS control unit 2
FAIL-SAFE
None
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F43-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Turn the AEB system ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F43-82” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F43-82” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
With Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F43 | 82 |
Around view control unit (Around view control unit) |
Diagnosis condition | When engine is running |
| Signal (terminal) | — | |||
| Threshold | If ADAS control unit 2 detects an error signal that is received from around view monitor control unit via CAN communication | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Around view monitor control unit
-
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F43-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F43-82” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F43-82” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F43-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM SELF-DIAGNOSIS OF AROUND VIEW MONITOR CONTROL UNIT
Check if any DTC is detected in “Self Diagnostic Result” of “AVM”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
B20a4-87 Headlamp (lh) Lin Communication
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC detection condition
B20A4–87
Headlamp (LH) LIN communication
[Headlamp (left hand) local interconnect network communication]
[MISSING MESSAGE]
Diagnosis condition
Ignition switch ...
Engine Stand Setting
Setting
NOTE:
Explained here is how to disassemble with engine stand
supporting transaxle surface. When using different type of engine stand,
note with difference in steps and etc.
Remove the engine and the transaxle assembly from the
vehicle, and separate the transaxle from the engine. Ref ...
Dtc/circuit Diagnosis. C161b-86 Abs System
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C161B
86
ABS system
(Anti-lock braking system )
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
CAN communication signal
Threshold ...