Nissan Rogue (T33) 2021-Present Service Manual: C0500 Wheel Speed Sensor

Nissan Rogue (T33) 2021-Present Service Manual / Engine :: Engine Control System / Kr15ddt :: Dtc/circuit Diagnosis / C0500 Wheel Speed Sensor

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
C0500 00

Left front wheel speed sensor

(Left Front Wheel Speed Sensor Circuit/Open) 		Diagnosis condition

  • Ignition switch ON

  • Battery voltage: 11 V
Signal CAN communication signal
Threshold When some DTC is detected in the VDC and via CAN communication is sent to the ECM
Diagnosis delay time 12 seconds or more

POSSIBLE CAUSE

  • Harness or connectors (Wheel speed sensor FL circuit is open.)

FAIL-SAFE

Engine Control System

Not applicable

Stop/Start System

Not applicable

DTC Confirmation Procedure

CHECK DTC

Perform the confirmation procedure for displayed DTC with VDC. Refer to below:

  • DTC C1061-11: Refer to DTC Description.

  • DTC C1061-13: Refer to DTC Description.

Is DTC detected?

YES>>

Refer to Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

DTC Diagnosis Procedure

CHECK DTC

Perform the confirmation procedure for displayed DTC with VDC. Refer to below:

  • DTC C1061-11: Refer to Diagnosis Procedure.

  • DTC C1061-13: Refer to Diagnosis Procedure.

Is inspection result normal?

YES>>

INSPECTION END

NO>>

Repair or replace error-detected parts.

    C0069 G Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition C0069 00 Yaw Rate/Longitude Sensors (Yaw Rate/Longitude Sensors)...
    C0501 Wheel Speed Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition C0501 00 Left front wheel speed sensor (Left Front Wheel Speed S...

    Other materials:

    Dtc/circuit Diagnosis. U2141-87 Can Comm Circuit
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is equipped ...

    U216e-87 Can Comm Circuit
    DTC Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-Nissan Ariya vehicle multiplex communication system with high data communication speed and excellent error detectability. Many electronic control units are equipped onto Nis ...

    Power Supply and Ground Circuit
    Ecm Diagnosis Procedure CHECK THE BATTERY CABLE Turn ignition switch OFF. Check the battery cable for tightening enough. NOTE: Check the continuity between the battery cable and the battery terminal. Is the inspection result normal? YES>> GO TO 2 ...